aznboi606's 2012 DBP coupe Build Thread

:love: Your car is super sexy! I really like your retro setup specially your shrouds
 
Finally able to get the intake in. Any base map for skunk2? Waiting to get downpipe and exhaust on for a full tune. I'm currently on a base map.

IMG_20160728_113746.jpg
 
yeah, unfortunately you'll need a custom tune for it.
 
Well good news and some bad news guys. I picked up a used sedan full race exhaust and got it done today. Polished the tip so it would look new. The bad news is that, I had the exhaust shop welded another hanger and made the exhaust more oval to clear the bags, but when I air out and air back up.... bags are rubbing :( about to take a hammer to this. (It was clear when I was at the shop, but when I got home, no good). Anyone experience with hammering an exhaust to clear the bag?

20160801_145101.jpg 20160801_145927.jpg 20160801_151857.jpg 20160801_161505.jpg
 
  • Like
Reactions: Nix
Maybe see if you can bend the hangar so the exhaust sits a little further from the bag?
The exhaust shop welded another hanger to pull it away from the bags, let me get a pic when I can. I'm just going to hammer it.
 
Time for a change. My 2nd set of retros. D2s 4.0 w/ Apollo 3.0 shrouds. Old set going off to its new owner... These projectors are amazing!!

20170110_234316.jpg
 
If anyone wants to do retros, I recommend d2s 4.0. way much better than the mini h1s... High beams are insanely bright!!

20170112_182413.jpg
20170112_182420.jpg
20170112_182448.jpg
 
Last edited:
Great output! Which bulbs are you using with the 4.0's?


Sent from my iPad using Tapatalk

I went with innovited 5k 55w that I got from Amazon. Couldn't afford the hid kit from trs.. my buddies have the morimoto kit, not much of a differences in my opinion.
 
Last edited:
Back
Top