How do I wire in a led strip?
- Thread starter Dzyn
- Start date
- Staff
- #2
- 55,511
- 23,809
How do you want the led strips to function? Depending on how you want the to turn on/off will dictate how you wire them.
http://9thcivic.com/forum/threads/p...-black-led-headlights.8925/page-8#post-329751
a lot of discussion in the last few pages of this thread regarding tapping them into parking lights etc
http://9thcivic.com/forum/threads/p...-black-led-headlights.8925/page-8#post-329751
a lot of discussion in the last few pages of this thread regarding tapping them into parking lights etc
- Thread starter
- #3
I want to tap into the parking brake/turn signal I just have no idea how to do this I have no experience with wiring
- Staff
- #4
- 55,511
- 23,809
you need to solder the wires, or you can use something called a t-tap. You can find them at places like autozone or similar stores.
View: https://www.youtube.com/watch?v=dpDAzi7fYY8
View: https://www.youtube.com/watch?v=dpDAzi7fYY8
- Thread starter
- #5
Ok, so I guess the red and white wires are for the parking light positive, yellow is for the directional positive, and Black is for the parking light ground. So is that what I use the t taps for?
Last edited:
- Staff
- #6
- 55,511
- 23,809
the wires from the led strip have to be connected by either soldering them or t-tapping them into your parking light ground/power. Do you have a link to what you purchased, or what exactly you're holding in the 2nd picture you uploaded? I can't read it or see what it says.