Very Nice, this is what I should of got instead of the KW kit which was blown on me. Now I dont have a car nor a SC on the car. The KW system is terrible, I hope no one buys it and end up like me. The blower blew on the 2nd basemap. And they are trying to tell me that I am at fault because there...
DONT BUY KW KIT and end up like me. Right now, no car and no SC on it.
My experience:
I purchased the KW kit, 110mm pulley, along with a fuel pump, stage 1 clutch flywheel, Skunk2 downpipe, Skunk2 catback exhaust.
I had VITVIPET tune the car, and we ran it on one basemap which I drove the...
I would like to add one more thing, KW customer service is good. when one of the injectors was messed up, they sent it to me via next day air. I worked with their engeener named CJ, and he did provide great customer service. It is hard to get ahold of them, but they do respond via email. But the...
Sweet,
I had the worse experience with KreftWerks and I am in the process of returning the whole system to them. The system is terrible, cheap in my opinion. I would not recommend anyone to buy it, its better to go with the CT-e unit.
My experience:
I purchased the KW kit, 110mm pulley...
Does anyone know the torque specs of the ground wires that need to be installed on the Valve Cover. There are two wires, front left corner and one to the right of it so that the fuel injections will power up. I searched everywhere, cant seem to find the torques specs of those two bolts that need...
Will do, for now I guess I will be using the OEM fuel Filter with the plastic fitting to avoid problem. I will call DW tomorrow and try to figure this out. Why do they send a new fuel filter that doesnt fit on that plastic holder is beyond my belief. I will get it resolved, and will let you guys...
Nice write up, but this DIY uses the OEM fuel filter. The DW65C comes with its own fuel filter, but it cannot just be placed on the plastic that has the OEM fuel filter on it. I would like to use the fuel filter provided by the DW, but that means that the plastic on the bottom that holds the...
Thank for trying Webby, don't waist your time doing that. I will try to go off what he has up there.
How about the DW65C fuel pump Install? Any suggestions where I can get info on that?
Is there a video or PDF of this DIY. I am getting the Exedy Stage 1 clutch put in today, I need help. Its hard looking at it from that website that the guy posted. Is there anything on here Webby? I am installing Stage 1 Clutch with Flywheel.
After that, I need to Install the DW65c fuel pump...
Sounds good. I will try that hose thats coming out of the middle. Thank you so much for your help! Once I get it done, I'll let you guys know how that worked.
I have my 52mm gauges placed around the shifter (i'll post pictures later to show you) and they look really cool where I placed them. So I want them to work so I don't have to look at my phone or tablet for those reading. Honestly, I put the gauges there more for looks so that they would look...
That's true Webby. The only issue with the hose that you pointed to is that the T fitting that came with the gauges, will not fit on the valve cover vent hose. That hose is pretty large in diameter and I cannot fit the T fitting on there. I tried going to a hardware store to get some connectors...
Ok webby, I will try that hose. I have an aftermarket CAI and that hose is connected to the CAI tube but I suppose that I could use that to make the dial move for now until I get the supercharger and hook it up to the PSI hose down the line. I was thinking of doing this but now that you point it...
Hello,
I am installing the water temp gauge and the boost gauge on my 2012 Honda Civic Si. I will be getting a supercharger this summer once I save more money for it. Right now I want to connect my boost gauge to the vacuum hose so that the dial moves when I drive the car. Can someone please...
Thank you, I will be putting a ultra quite resonator which should take care of the raspy noise and rattling in the cabin. It should be here any day now. I figured i should replace the rear motor mound anyways to be safe so I ordered the hasport 62A RMM. If you install it right, there should be...
For sure. I will figure it out. Most likely will run the wire through to the headlights. I will go ahead and tackle this task today and will post a DIY later this week. Thank you for the help.
Hello,
Can someone please help answer my question here. I have read many threads and it seems like no one answered my question so I will go ahead a ask here.
I have a Skunk2 catback exhaust on my 2012 Honda Civic SI Coupe. I hate how loud the exhaust is since I took the silencer off so I...
Thank you for the response Pauly!
I found out that I just need to connect the 'dim' wire of the gauges to the headlights positive wire in order to get them to dim once the headlight turn on. I don't need to connect them to the instrumentals which is good.
Do you by a chance know where the...