2013 LX Front Badge Replacement

RTuckerNC

Active Member
9
1
Though it's always possible that it fell off, I believe that someone managed to pry off the front badge from my 2013 LX. I've found a couple sources for a new badge and the pushnuts, but I was wondering how involved installing the new badge would be. Do I need to remove the plastic guard that connects between the grill and frame? If so, are the clips reusable, or do I need to order more of those as well?
 
Your going to want to remove the front bumper cover to put the push clips on. All the hardware will be reusable. You might be able to put it on without removing but it's a tight space to squeeze your hand in. You could always try loosening up the top of the cover and see if you can get in there. There's 2 hex head bolts left and right of the hood latch. There's also a few clips on top that you could remove as well.
 
The bumper cover on these cars is very easy to remove if you do have to go that route. It's a pretty tight fit to get your hands to where the back of the badge is.
 
Back
Top