Dar-Dar's 1995 Avus Blue E36 M3 Project Car

I also bought a can of POR15. I noticed some parts of the frame that needs some anti-rust coats.

Sent from my MotoG3 using Tapatalk
 
Oil pan removal. Part two:

This engine support from harbor freight is pretty good.
6d7b611713417da45227e0bdcf4e512b.jpg


Slowly lowering the cross member.
c579b98772ecc0e297e2078ef43f2619.jpg


One of the bolts holding the pan from the transmission had the head rounded out. So I cut the head off with a dremel. I also cut a line on the other end of the bolt to unscrew it out. Lol.
1db5d6c33d0bc62ae0c22121a77951b9.jpg

4955049ded3d1fd6d46863d3806c69ab.jpg


I replaced the oil pump nut with the modified one. It was my first time using a safety wire. I think it is wired well. Lol. I also put thread lock on the nut just to be safe.
1f0025305b261d58368b0e3bb1f882ca.jpg

c5b9ff09be8b2b6e4df99f767fd045c5.jpg

9e320d4ac028bc4c758c53f1f8b1f428.jpg

83c88d0fad0a9901a36e0b7a8619510d.jpg


I scraped off the excess old gasket material.
11986d24c016b695519637437ffa61d0.jpg


And the new gasket is installed.
c62771ecf85f66b928ba7381b19ef8ff.jpg


I still need to install the steering rack and power steering pump.

Sent from my MotoG3 using Tapatalk
 
Improvements are always a great feeling to get accomplished, well done. I'm amazed at some of the results from the rust converter they have now, used some on a 64 bug years ago that was pretty toasty but ended up looking pretty good in the end.
 
It looks like I won't have time tonight to work on the car. I'll fill the engine with oil on Sunday.

These just came in today. Thermostat, aluminum thermostat housing, and the can of POR15.
3f60af244bb29f310ac8c87ecf387f49.jpg

c018b2aeaa07d36080423f7bc9f6e075.jpg

I didn't realize that I had to change the thermostat when I replaced the water pump. Thats probably the reason why the car was getting weird temp readings when I was driving it after the water pump change.

Sent from my MotoG3 using Tapatalk
 
Even though at work we can get away with not changing a thermostat with a water pump R&R or coolant exchange, I always try to do it on my personal vehicles but I'm no saint to that I promise you lol
 
Darkout said:
Even though at work we can get away with not changing a thermostat with a water pump R&R or coolant exchange, I always try to do it on my personal vehicles but I'm no saint to that I promise you lol
Click to expand...
It was stupid of me. It's pretty easy to flush out the system at least. I won't flush all of it since the coolant is still fresh.

Sent from my MotoG3 using Tapatalk
 
Darkout said:
Just a time consuming re-do no biggie :badger:
Click to expand...
It should be quick the second time. :giggle: Plus, I have to install new serpentine belts.

Sent from my MotoG3 using Tapatalk
 
I fixed the fuel leak issue by cutting out the fuel pipe with the pin hole. I then added a fuel hose that connected to the end of the fuel hose using a double sided barb.
bd88e8c3e84e7784502def526040ff2e.jpg

d27c955833a9b70eefe0535f23125318.jpg

990b1bbc382169f85dfe17eff42a584b.jpg

fdd4e9a6b90082dc7c6957215c6c092d.jpg


Sent from my MotoG3 using Tapatalk
 
Last edited:
I filled the power steering reservoir with fresh Redline ATF.
a4207dfde792546f0620b22cd16b562c.jpg

I also added Rotella 5w-40.
b6ed8114f47674f9b2216e1f238d5a6a.jpg

The heat shield did not have weather stripping so I put one.
93e0f4484e6d797c6d6e996bb0acc6a0.jpg

f89a6982a70ba83efe6339a1c872d7d8.jpg

The belts were changed since the old ones were cracking.
cb7861d18920c3b8dcba9599d4e414e8.jpg

And the thermostat and thermostat housing were changed. I didn't have to flush out the cooling system and only removed the clutch fan to install the thermostat/thermostat housing. It was easier than I thought.
c64bdee9ca2885c1c0c19e8a002b2e5d.jpg

a3e9d93f2d84f96d55df42fc6649ab90.jpg

I did a good amount today.

I still need to change the MTF, brake fluid, and gear oil.

Sent from my MotoG3 using Tapatalk
 
I purchased a grille molding and two kidney grilles. The molding was only $26 on Rockauto.
c05fc130d96b2fabaa99c0cc20c515d1.jpg

The front end molding is banged up (not worth repairing) and the kidney grills have tabs that are falling apart.

I'll be painting the molding with matched paint from automotivetouchup.com. I also have a few cans of 2K clear coat laying around in the garage. I love painting car parts.
 
You must log in or register to reply here.
Back
Top