Official 'What did you do to your car today?' Thread

1512738_10152139559917442_874414896_n.jpg
 
My wheel baking setup. :rotfl: The heat gun only has a min heat setting at 400F. I dont need 400F, it's too high. At least the blow dryer can get hot enough. I wish I had a thermal scanner though.
IMG_2754_zps872d65c3.jpg
 
Ok, so I test fit my DigitalFits in my car and this is what I saw. Large gap here between left side of floor edging and the left side of the mat (area that I have circled, in the image)..... haven't actually had a chance to use them because I didn't know if this was a defect?? Can anyone chime in, and let me know if this will work itself out or if should I contact WeatherTech?Floor Mat 2 copy.JPG
 
Mine don't fit like that. I'm guessing it's the way they were folded when shipped? Mine came in a box and weren't bent at all that I can remember. I'd suggest to give them a few days to settle to see if that works itself out. If it doesn't, contact Weathertech.
 
@Lib625 they just need a few days to adjust from shipping.

I got mine almost two weeks ago with the same thing and after a week or so they settled in.
 
andre12dbsi, jassmi, LizBot, ADExternal... thanks all for your advice. They were bent from shipping, have them in the house at the moment so they can warm up and hopefully settle back to original form. I'll try them back in my car in a day or 2.
 
Windows tinted and yellow foglight overlays heh
5atuza9a.jpg
 

Attachments

  • uploadfromtaptalk1388007067532.jpg
    uploadfromtaptalk1388007067532.jpg
    74.3 KB · Views: 17
Big *** mirror from ebay
9emyryme.jpg
 

Attachments

  • uploadfromtaptalk1388180487086.jpg
    uploadfromtaptalk1388180487086.jpg
    78.3 KB · Views: 19
Last edited:
Took the splash guards off (looks better imo) and gave it a much needed wash after the 900+ miles I put on over the last 5 days... lots of traveling. ..
 
You must log in or register to reply here.
Back
Top