ErckleSi
Well-Known Member
Ok sweet can't wait to see how it goes
Betty White tying da twisties like skrewlaces Wit dat possible *Whine* on teh Side... bout dat lyfe.
- Thread starter Six_speed_demon
- Start date
- Thread starter
- #1,562
Six_speed_demon
Well-Known Member
Not to much longer either
- Thread starter
- #1,563
Six_speed_demon
Well-Known Member
ErckleSi
Well-Known Member
I'm just a little curious on why u went with the kmod turbo kit over the prl turbo kit?
- Thread starter
- #1,565
Six_speed_demon
Well-Known Member
Because I was testing the kit for the 2013 sedan and it was 1k lower but the kmod kit is 85% PRL anyway.... So it was a little bit of a saving
ErckleSi
Well-Known Member
Oh wicked ur the tester for the kmod turbo kit for the 13/14 si sedan?
And you're saying kmod is better because its cheeper?
Last edited:
- Thread starter
- #1,567
Six_speed_demon
Well-Known Member
Yes kinda but like I said 80% of kmod kit is PRL. The manifold the Downpipe the CAI the dump tube and the turbo all came from PRL. He did the intercooler piping and front mount. I didn't know that until I got it. I would have just done PRL if I had knew that. But his kit makes good power so far
ErckleSi
Well-Known Member
Oh ok I get you now lol. Thanks for the info
- Thread starter
- #1,569
Six_speed_demon
Well-Known Member
Well I guess this qualifies!
Tomorrow just have to put the waste gate Downpipe do the boost controller put the dump pipe on and then the drain and bam the transplant will be done! Couldn't have done none of this without my right hand man Ryan! Thanks again buddy! Your the freaking best! Will be firing up tomorrow!
Tomorrow just have to put the waste gate Downpipe do the boost controller put the dump pipe on and then the drain and bam the transplant will be done! Couldn't have done none of this without my right hand man Ryan! Thanks again buddy! Your the freaking best! Will be firing up tomorrow!
ErckleSi
Well-Known Member
Looks sick!
spicy
Well-Known Member
- 329
- 268
Wow. Nice build man. That looks phenomenal.
- Thread starter
- #1,572
Six_speed_demon
Well-Known Member
Thanks everyone!
This all was possible because of my 3 great and best buddies ever Matt Gibbs which it was his storage unit Ryan Fetrow who did a lot of the work myself which helped along and Steve D aka scuba! Thank you soooo much! The car is running have to change out a coolant line it's leaking and get another gasket for the Downpipe to connect to the exhaust as it has a pretty bad exhaust leak and readjust my waste gate so the dump tube doesn't rub the subframe.
Can't wait to drive it!
This all was possible because of my 3 great and best buddies ever Matt Gibbs which it was his storage unit Ryan Fetrow who did a lot of the work myself which helped along and Steve D aka scuba! Thank you soooo much! The car is running have to change out a coolant line it's leaking and get another gasket for the Downpipe to connect to the exhaust as it has a pretty bad exhaust leak and readjust my waste gate so the dump tube doesn't rub the subframe.
Can't wait to drive it!
Last edited:
- Thread starter
- #1,573
Six_speed_demon
Well-Known Member
ErckleSi
Well-Known Member
Thanks everyone!
This all was possible because of my 3 great and best buddies ever Matt Gibbs which it was his storage unit Ryan Fetrow who did a lot of the work myself which helped along and Steve D aka scuba! Thank you soooo much! The car is running have to change out a coolant line it's leaking and get another gasket for the Downpipe to connect to the exhaust as it has a pretty bad exhaust leak and readjust my waste gate so the dump tube doesn't rub the subframe.
Can't wait to drive it!
That's just awsome dude! I take it that the install was a breeze?
- Thread starter
- #1,575
Six_speed_demon
Well-Known Member
The install was not a breeze that's for sure. Hahahah but was worth it. We got it done without dropping the subframe that was a huge win!
ErckleSi
Well-Known Member
That's good to hear u disnt have to drop the subframe! And did you have to tap you oil pan?
- Thread starter
- #1,577
Six_speed_demon
Well-Known Member
Nope I didn't drop the frame and I didn't tap the pan either PRL kits have a oil drain kit that doesn't require tapping the pan
ErckleSi
Well-Known Member
Damn that's good quality! I'm really undecided lol prl had a damn good turbo kit but merc racing is comming out with a tvs supercharger that claims that it puts out around 400 hp
- Thread starter
- #1,579
Six_speed_demon
Well-Known Member
Yeah I know all about the TVS kit Jose is doing. But the PRL price is unbeatable 3999.99 for a full turbo kit that is crazy
ErckleSi
Well-Known Member
That is crazy! And it comes with everything you need?