sein929
Member
- 11
- 6
Tools needed
-Jack
-Jack stand
-4 way lug nut tool
-Socket wrench
-10mm socket
-Flat head screwdriver
Step 1. Remove the left front wheel
Step 2.remove these two clips and there's a plastic tab connected to the shield on the bottom right just pull it back from it's location.
Step 3.remove all the the clips that hold the inner wheel shield but leave the last three Phillips screws on the bottom right on! There's also one more clip on the bottom underneath the bumper and a 10 mm bolt that you will have to remove in order too remove the shield.i will post up pictures of those bolts when I get home!
Step 4.
Remove theses two 10mm bolts
Step 5. Remove the 2 retainers from the snorkel it's kinda hidden on top in the inner fender but it's visible just follow snorkel upwards and you can't miss it. (sorry I didn't take a picture of it)
Step 6. There's a hidden 10mm bolt holding the resonator in place it will be to the left of the snorkel on too of the bottom resonator remove that bolt.
Step 7. Jiggle the resonator back and down to remove the unit.
Step 8. You should have the resonator out now drill the pivot out and remove the resonator from the unit.
Step 9. Add the P2R resonator delete to the bottom were the resonator was removed from and that's it do everything in reverse!
-Jack
-Jack stand
-4 way lug nut tool
-Socket wrench
-10mm socket
-Flat head screwdriver
Step 1. Remove the left front wheel
Step 2.remove these two clips and there's a plastic tab connected to the shield on the bottom right just pull it back from it's location.
Step 3.remove all the the clips that hold the inner wheel shield but leave the last three Phillips screws on the bottom right on! There's also one more clip on the bottom underneath the bumper and a 10 mm bolt that you will have to remove in order too remove the shield.i will post up pictures of those bolts when I get home!
Step 4.
Remove theses two 10mm bolts
Step 5. Remove the 2 retainers from the snorkel it's kinda hidden on top in the inner fender but it's visible just follow snorkel upwards and you can't miss it. (sorry I didn't take a picture of it)
Step 6. There's a hidden 10mm bolt holding the resonator in place it will be to the left of the snorkel on too of the bottom resonator remove that bolt.
Step 7. Jiggle the resonator back and down to remove the unit.
Step 8. You should have the resonator out now drill the pivot out and remove the resonator from the unit.
Step 9. Add the P2R resonator delete to the bottom were the resonator was removed from and that's it do everything in reverse!
Last edited:
