323's Build

How do you like the look of that harness? Everything is nicely sleeved isn't it? Some of the ends are a little short. Electrical tape them in place just to keep it secure. You could also try and tighten up the shrink wrap at the ends with a little heat but I think it's as far as it goes down already. Just something I've noticed from experience with them.
 
I was very impressed by the quality of everything, especially the wiring. It's often overlooked by other companies and made as "good enough" but these are fantastic
 
  • Like
Reactions: Nix
Just got my H1 CREE LED DRLs
81xvodLl.jpg
 
Small but powerful LED bulbs. I wanna see how they look. :D
 
  • Like
Reactions: 323
Dar-Dar said:
Small but powerful LED bulbs. I wanna see how they look. :D
Click to expand...
I'm hoping to install all my lights Thursday since I have the day off.
I love the look of CREEs. And I like how they still have and SMDs on the sides to light up the reflector housing
 
I can't use my fog lights during winter bc I'm afraid the temp of the halogen bulbs will crack the fog light lens like what happened to my 1st set. I had 102 SMDs (Not high wattage CREEs) on my fogs but got rid of then bc they were too dim. Lol. I might get HIDs or higher output CREE bulbs so I can use my fogs when it is cold out. The only problem with the HIDs is the glare.
 
Well I'll be sure to take plenty of pics and maybe you'll like the CREEs enough to just get those. Much cheaper and easier to install than HIDs too
 
Installed all my LEDs, ran out of time to do my HIDs :(
The LEDs do look sick tho, i like how the CREE LEDs have a couple SMDs on the side to light up the reflective housing
Except for the turn signals, i wanted them just CREEs, because there not much of a reflective housing there

I'll take more pictures at night with them on
Also put my Rodger's sticker on and my blue center cap stickers

Started the day off right!
QA8lRAMl.jpg


CREE LED H1 hi beam/DRL
tyGvPVAl.jpg


CREE LED switchback turn signals
qav6n0Zl.jpg


CREE LED fog lights
eJfLAdZl.jpg


Center caps
xLmXTLwl.jpg


Rodger's sticker, i'll probably just get a few laughs from it then take it off
JYNSJBPl.jpg


one more pic
We070hql.jpg
 
Last edited:
Ah that looks great man! The blue accents on the wheels are nice. Perfect match with the paint.

Did you have to run any resistors with the switchback turn signal bulbs?
 
  • Like
Reactions: 323
Nix said:
Ah that looks great man! The blue accents on the wheels are nice. Perfect match with the paint.

Did you have to run any resistors with the switchback turn signal bulbs?
Click to expand...

yea i ran resistors with all the LEDs just to be safe.

If anyone is interested, you have to wire the resistor to the BLUE and BLACK wires coming out of the turn signal harness, DON'T touch the RED wire
 
I wanna see them lit up! They look nice. :thumb:
 
  • Like
Reactions: 323
That looks good. The fogs look bright too.
 
  • Like
Reactions: 323
They are nice and bright, I love how everything came out
 
You must log in or register to reply here.
Back
Top