MTEC Industries Shift Springs

[Redrocket1]

@Redrocket1 http://www.mtecind.com/diy/shift-spring-install/ pretty much explains it all.

Thanks. I wound up throwing in the towel when I found out I also need to reseal it after.

 

[Flightmaster127]

Thanks. I wound up throwing in the towel when I found out I also need to reseal it after.

Just go to your local dealer and ask for hondabond. They will have it in stock. Probably about 12 bucks for the tube.

 

[Redrocket1]

Just go to your local dealer and ask for hondabond. They will have it in stock. Probably about 12 bucks for the tube.

Yea I ordered some from Amazon yesterday, since my dealer is closed on Sunday anyways. I wasn't giving up. Also needed an 8mm Allen socket for that tight AF front bolt. Hoping I'll get enough torque out of my 3/8 inch driver. Otherwise I'm going to need to order one for a 1/2 inch.

 

[Darkout]

Could use an extension on a deep socket that fits over your ratchet handle for added leverage. Do it all the time, just be careful.

 

[Redrocket1]

Could use an extension on a deep socket that fits over your ratchet handle for added leverage. Do it all the time, just be careful.

Good call there, thanks.