Search results

Oh true, crutchfield is awesome. I found out about them after I bought my speakers, so pissed I didn't buy from them to begin with. You should be able to run it from the factory on wire with no problem! Sent from my LG-LS993 using Tapatalk

I would recommend buying these that way you don't have to cut into the factory wiring, I used them when I installed my speakers and they are a huge life saver since me and anything electrical tend to not get along lol Sent from my LG-LS993 using Tapatalk

You won't necessarily damage them, they'll just be underpowered and won't sound nearly as good as they should. If you have an LX or EX without the premium audio, your Headunit is only rated for 160 watts or about 40 per channel. Which is almost half the power needed to reach their RMS. So forget...

I actually ended up ordering another one, completely forgot to post it here tho. Here's what the dash looks like now [emoji7] Sent from my LG-LS993 using Tapatalk

For everyone still curious, I've completed the swap and posted a thread about it! You can find it here: http://9thcivic.com/forum/index.php?threads/15650/ Sent from my LG-LS993 using Tapatalk

That's exactly what I want to do, I currently use Torque. But I'd really like to have something permanent. Will definitely look into them, thanks for the suggestion! Sent from my LG-LS993 using Tapatalk

Welcome bruh! Sent from my iPad using Tapatalk

193 atw isn't bad. That's actually really close to the factory rated 207HP. Only a 7% loss. Sent from my LG-LS993 using Tapatalk

So nice to see a clean EG that's not all riced out [emoji7] Sent from my LG-LS993 using Tapatalk

Basically as the title asks, looking for any recommendations on a coolant temp gauge, Doesnt need to be anything fancy. Thanks in advance! Sent from my LG-LS993 using Tapatalk

Just looked up your bulb type, you do in fact have 9006's. Make sure that you push slightly and twist clock wise when installing them. Match the three flaps with their matching holes on the assembly, push in and twist clockwise. If you just twist and not push, the bulb wont seat right.

In that case, Id recommend removing the assembly and re-seating the bulbs. It'll involve removing the bumper but it's the best option Sent from my LG-LS993 using Tapatalk

This^ Sent from my LG-LS993 using Tapatalk

I believe you have 9006's as your low beams. Make sure they are seated correctly. Usually that's the most common problem Sent from my LG-LS993 using Tapatalk

What year/body style is your Civic? Sent from my LG-LS993 using Tapatalk

Keep in mind, although the new unit supports HDMI, youll have to get the harness for it. Its actually kinda cheap, you can find it here: https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1312.R2.TR10.TRC2.A0.H0.X2014.TRS2&_nkw=2014+Honda+civic+hdmi&_sacat=0

Could you send a picture of your current dash? From what I understand, the '13 and '14 have a completely different dash. I also believe your model is the older HondaLink system which has a different harness compared to the '14. Top is your system: This is the 2014 HondaLink: Looks like the...

Im with Webby on this, sounds like you should get the valves adjusted. Do this before buying new ignition coils imo.

I usually only use it on the highway. Can't stand how slow it accelerates with econ on, around town lol Sent from my LG-LS993 using Tapatalk

Basically alters throttle response, and changes when the compressor cycles to improve MPG's. Sent from my LG-LS993 using Tapatalk