retrofit shopping list?

[nat3d]

so ive decided finally that my next big project will be a retrofit what EXACTLY do i need? ive seen a list that @AlienPrime put together but he didnt list shrouds in it and i have some questions about which shrouds would fit because i found a couple sets i kinda like. also if i have a system will the voltage drop effect the hids?

 

[AlienPrime]

so ive decided finally that my next big project will be a retrofit what EXACTLY do i need? ive seen a list that @AlienPrime put together but he didnt list shrouds in it and i have some questions about which shrouds would fit because i found a couple sets i kinda like. also if i have a system will the voltage drop effect the hids?

everything i listed is what you need. Buy an H1 kit (comes with shrouds)


1 - OEM USDM Headlights (chose to buy an extra set!) ---------------$350
2 - Morimotto H1 Bi-Xenon Projectors ----------------------------------$130
3 - Black Flexible bumper paint ------------------------------------------$20
4 - #18AWG wire for Hi/Low control ------------------------------------$25
5 - High temp industrial clear silicon ------------------------------------$18
6 - Painters tape and bags -----------------------------------------------$2
7 - H1 HID Kit (regular H1 bulbs don't fit*) -----------------------------$180
8 - 40A Relay 30A fuse (or relay harness on ebay) --------------------$20 +/-
9 - OEM Honda Hi/Low Switch -------------------------------------------$22

Hope that helps!

 

[webby]

#9) oem hi/low switch?

 

[nat3d]

yeah I didn't know what you meant by the high low switch. And the relay.

 

[webby]

the relay - (wire harness)
http://www.theretrofitsource.com/co...low-beam-relay-wire-harness.html#.U3LFnlFdXj8

 

[Nix]

if you run a proper 9006 wiring harness you can use the stock controls.

 

[nat3d]

that's the way I wanna do it I want it to be just like stock

 

[AlienPrime]

#9) oem hi/low switch?

*5 pin magic switch*

 

[webby]

You have your headlights wired to the 5 pin switch?

 

[jasonandre]

I think we need pics of AlienPrime's engine bay and under the steering column. I'm imagining a plethora of wires.

 

[AlienPrime]

You have your headlights wired to the 5 pin switch?

yes 5 pin magic switch to hid bi-xenon cutoff so that i have two separate independent high beams

 

[AlienPrime]

For completion sake, i used the 5 pin magic OEM Honda button to complete all my installations!

FYI: I took this pic before i put heatshrink and wrapped all cable in cable loom! I would never do that! HAHAHA!

Check out the magic 5 pin switch >HERE<

 

[webby]

Well that isn't a "must" to get a retrofit done.

 

[AlienPrime]

Well that isn't a "must" to get a retrofit done.

thats correct, you can run bi-xenon on stock HB wiring or not run it at all

 

[Shagydishapopo]

In for more info. Im wondering aswell what all the parts I need without the 5 pin I also want to do it stock way.

 

[Shagydishapopo]

So I have all this on my list right now. Are these good enough to do the mod?

http://www.amazon.com/dp/B004ZF3IT6?_encoding=UTF8&psc=1&s=
http://www.amazon.com/Morimoto-9006...&qid=1400161308&sr=1-1&keywords=hd+relay+9006
http://www.amazon.com/gp/product/B00B21R0TA/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A1LHYP56PG11FM

 

[AlienPrime]

In for more info. Im wondering aswell what all the parts I need without the 5 pin I also want to do it stock way.

5 pin switch you can get at honda deal

Here is how to wire it up!
http://9thcivic.com/forum/threads/diy-honda-5-pin-magic-switch.6478/
PN: 08E10-TA0-1M035

 

[Shagydishapopo]

Ive read your diy so many times trying to figure it out. I like that you used one of those switches for your garage lol.

 

[AlienPrime]

Ive read your diy so many times trying to figure it out. I like that you used one of those switches for your garage lol.

haha yeah thanks. Well you can PM me with any other questions too