Sidemarkers question
- Thread starter FG4 Pjay
- Start date
jnastii
Well-Known Member
- 674
- 652
you're better of buying just a side marker you like and making the hole your self. thats what i did. I used the JDM DC5 clear ones.
He's going to make a template eventually with the fenders he got from overseas. I highly doubt he'll import anymore, not enough interest in them.
team3d
Well-Known Member
yeah, it's very expensive to buy a factory fender with side marker cut out, you can save yourself $700 if you just cut it yourself..
just make sure you install the "correct" year side marker...
i actually got few pairs, they are very inexpensive & it matches the projector headlights... i will try to post some photos
just make sure you install the "correct" year side marker...
i actually got few pairs, they are very inexpensive & it matches the projector headlights... i will try to post some photos
Last edited:
team3d
Well-Known Member
2012FG4
Well-Known Member
- 11
- 10
Does anyone know which side marker should be purchased for our cars? They have so many out there and none for our car specific...
Most have used DC5 side markers
ADExternal
Lvl: 99 Modifier
I believe @Kutt504 has side markers. Maybe he can chime in on how he did it.
team3d
Well-Known Member
dc5 side markers are the "wrong" look for our car, it's very outdated, the base for honda side markers are all the same (for the past 15 years), except the finish...
you can easily swap it to a different honda side markers if you wish.
factory honda 2012+ civic side markers are only $25 a pair
91alexm
Well-Known Member
team3d
Well-Known Member
finally took some photos of 9th gen civic side markers... apparently, 8th gen civic type-r in japan also use the same side marker as the 9th gen (8th gen non type-r civic use dc5r side marker)
