DIY Trunk Pop Up Higher

[Pauly99to17]

I added a hybrid spoiler and reverse camera/wires so my trunk is quite a bit heavier than stock.
Very simple DIY if you would like to get your trunk to pop a little higher.

Takes about 60 seconds. haha. Took me 30 minutes to figure out the best positioning though.

Needed Materials
2 short Bungee chords

Just need to attach bungee chords as shown. One on the left side and one on the right.

BEFORE


View: https://www.youtube.com/watch?v=4pr8HO8yb3Y



AFTER


View: https://www.youtube.com/watch?v=LF8X8N2Pg7g&feature=youtu.be

 

[Pauly99to17]

Updated

 

[webby]

cheap & simple fix pauly

 

[derekfriedrice]

that's awesome, I'll have to do that this weekend

 

[ASM13LX]

This may help you, Check out the diagram for the 2012 Civic SI Trunk Springs. Check the weight of your add ons + Trunk weight, then the same with the Si setup. IF the weight is close, you can get the Si trunk springs. But of course, if a bungee strap doesn't bother you, you already have the cheapest solution

http://hondapartsnetwork.com/assembly/43/4/4/11/8/19540/2012-Civic-Sedan-SI-6-Speed-Manual-Trunk-Lid

 

[squiggy]

This may help you, Check out the diagram for the 2012 Civic SI Trunk Springs. Check the weight of your add ons + Trunk weight, then the same with the Si setup. IF the weight is close, you can get the Si trunk springs. But of course, if a bungee strap doesn't bother you, you already have the cheapest solution

http://hondapartsnetwork.com/assembly/43/4/4/11/8/19540/2012-Civic-Sedan-SI-6-Speed-Manual-Trunk-Lid

I believe the springs changed when the bigger spoiler was added as well. So, that could be a route as well.

 

[jhuerto23]

nice... i'm gonna have to do this.. Will this work on the sedan versions as well?

 

[webby]

His car is a sedan