07TLX
Well-Known Member
Minus the taillights its not bad.... Would be better as a hatch thou
Turbo+ AWD!!!!!
- Thread starter Damaca
- Start date
clevrname
Well-Known Member
- 1,584
- 241
I like the sedans :shrug:
But I like the versatility of the hatch.
Good thing I have a coupe
But I like the versatility of the hatch.
Good thing I have a coupe
07TLX
Well-Known Member
5 doors FTW!!!!!
clevrname
Well-Known Member
- 1,584
- 241
They need to do the STi Limited Sedan with the lip spoiler 
death_roll
Well-Known Member
Not to mention that the hatch has lower insurance also 
FloppyNoodle
Well-Known Member
Haha not really better on the driving. That's remnants of the highway driving from Philly.I like the WRB on the Sedan.
Not a fan of the taillights at all tho. I see you've been doing better with driving
bootyluvr
Well-Known Member
I got PARTS!! 
What they do:
Tie the lower a-pillar frame member to the upper front frame member for triangulation of the junction between to two to make it stronger. There are braces there in the stock config, but those are stamped steel, and about as strong as a wet noodle. Ours are much stiffer.
What they are made of:
6061-T6 Aluminum.
Why you want them:
Stiffer is better!! Seriously, people who have installed them have been amazed at what a drastic change such a small part can make. Instead of making your car's frame act like a spring let your spring act like a spring. Afterall, that's what it's supposed to do.
Oh, and for the guys who still don't believe us. You're selling yourself short, and you'll learn it the hard way at the track when your competition enters and exits corners faster than you. Heck, you know what, don't buy them. Our customers will just enjoy beating you around the track that much more.
What they do:
Tie the lower a-pillar frame member to the upper front frame member for triangulation of the junction between to two to make it stronger. There are braces there in the stock config, but those are stamped steel, and about as strong as a wet noodle. Ours are much stiffer.
What they are made of:
6061-T6 Aluminum.
Why you want them:
Stiffer is better!! Seriously, people who have installed them have been amazed at what a drastic change such a small part can make. Instead of making your car's frame act like a spring let your spring act like a spring. Afterall, that's what it's supposed to do.
Oh, and for the guys who still don't believe us. You're selling yourself short, and you'll learn it the hard way at the track when your competition enters and exits corners faster than you. Heck, you know what, don't buy them. Our customers will just enjoy beating you around the track that much more.
death_roll
Well-Known Member
I got PARTS!!
What they do:
Tie the lower a-pillar frame member to the upper front frame member for triangulation of the junction between to two to make it stronger. There are braces there in the stock config, but those are stamped steel, and about as strong as a wet noodle. Ours are much stiffer.
What they are made of:
6061-T6 Aluminum.
Why you want them:
Stiffer is better!! Seriously, people who have installed them have been amazed at what a drastic change such a small part can make. Instead of making your car's frame act like a spring let your spring act like a spring. Afterall, that's what it's supposed to do.
Oh, and for the guys who still don't believe us. You're selling yourself short, and you'll learn it the hard way at the track when your competition enters and exits corners faster than you. Heck, you know what, don't buy them. Our customers will just enjoy beating you around the track that much more.
Actually the GR chassis (>08 STI, 11 wrx) have these from the factory. They're not as sturdy as the best aftermarket parts, but they're still there.
Any more parts Jeff? Whiteline roll center kit?
My whiteline 22mm rear sway & kartboy endlinks come in tomorrow
bootyluvr
Well-Known Member
Actually the GR chassis (>08 STI, 11 wrx) have these from the factory. They're not as sturdy as the best aftermarket parts, but they're still there.
Any more parts Jeff? Whiteline roll center kit?
My whiteline 22mm rear sway & kartboy endlinks come in tomorrow
Yes I know your fender braces from the factory are MUCH better than ours. Lucky!
No more parts yet Jason. I haven't had time to call IAG to set up a date/time for them to install the WL Roll Center kit and do an alignment. I'm going to email Rick (guy @ IAG) and tell him to email me dates next week or the week after that is available.
They are coming in that quick??!
I ordered my fender braces on Monday and they are here today
07TLX
Well-Known Member
Pics are proof, looks like its gonna help you a lot
bootyluvr
Well-Known Member
This makes me 
bootyluvr
Well-Known Member
Yes I had to show you all proof since you wouldn't believe me :-p
- Thread starter
- #2,653
Yes I know your fender braces from the factory are MUCH better than ours. Lucky!
No more parts yet Jason. I haven't had time to call IAG to set up a date/time for them to install the WL Roll Center kit and do an alignment. I'm going to email Rick (guy @ IAG) and tell him to email me dates next week or the week after that is available.
They are coming in that quick??!
I ordered my fender braces on Monday and they are here today
Pft. Jason, he'll never get them. I'm still shocked he spent this money on that car. Hell, I'm shocked it gets gas.
07TLX
Well-Known Member
EWWWWW!!!!!!!!!!!! Stretched tires FTMFL!!!!!!
- Thread starter
- #2,655
Looks like runny poop.
bootyluvr
Well-Known Member
Pft. Jason, he'll never get them. I'm still shocked he spent this money on that car. Hell, I'm shocked it gets gas.
Oh you!!
*LIKE*
bootyluvr
Well-Known Member
'11 WRX Exhaust Clip
bootyluvr
Well-Known Member
bootyluvr
Well-Known Member
The exhaust doesn't sound good IMO... :/
Agency Power EL headers
Agency Power Uppipe
Invidia Q300 Dual exhaust.
Invidia catted DP.
Agency Power EL headers
Agency Power Uppipe
Invidia Q300 Dual exhaust.
Invidia catted DP.
07TLX
Well-Known Member
Looks like I am gonna be starting to work August 1st and I am going to Pittsburgh to supervise a concrete pour for I don't know how long.... Hope its not the full 2 yrs of the project....lol