JustinB
New Member
Hello All!
So in all my research on power bla bla bla I decided to install a Nitrous Express system in my civic.
Main Issue: Where the hell is the Throttle Position Sensor -> ECU/PCM lead?!
I tested the 3 wire connector on top of the TB, and the values don't seem to coinside with what i should be seeing. The other option is the large harness on the back side of the TB, which I was staying away from until I knew for sure it was in there.
I have looked all over the web, got the membership to Service Express through Honda, and still.. even with the ECU pinouts, the only bit of info is an A and B for the TPS, and the voltage rating is different for both.
Does the 2014 use 2 leads to get the ECU the value of the Butterfly valve? Or? I am completely stumped... If I am just missing something glaringly obvious, I can understand that.
So in all my research on power bla bla bla I decided to install a Nitrous Express system in my civic.
Main Issue: Where the hell is the Throttle Position Sensor -> ECU/PCM lead?!
I tested the 3 wire connector on top of the TB, and the values don't seem to coinside with what i should be seeing. The other option is the large harness on the back side of the TB, which I was staying away from until I knew for sure it was in there.
I have looked all over the web, got the membership to Service Express through Honda, and still.. even with the ECU pinouts, the only bit of info is an A and B for the TPS, and the voltage rating is different for both.
Does the 2014 use 2 leads to get the ECU the value of the Butterfly valve? Or? I am completely stumped... If I am just missing something glaringly obvious, I can understand that.