Death_roll's GC6 Backroad Killer

[jrotax101]

It looks so much bigger now it's black

 

[death_roll]

It looks so much bigger now it's black

You know what they say.....I'm never goin' back

 

[k757]

Ricer

 

[death_roll]

Installed my rear differential bushing inserts. No one makes them for this car anymore so I had to get ones for an 05-09 Legacy GT and modify them to fit.

Unmodified on the left, modified on the right.


Installed!

 

[k757]

You can work on my car anytime

 

[death_roll]

You can work on my car anytime

Let's get that RMM on the ST, or will that bump you up a class?

 

[k757]

Let's get that RMM on the ST, or will that bump you up a class?

I'm sure it would

 

[death_roll]

Always wondered why the radio never worked. Traced it to a bad connection on the antenna.


New one vs the old one

 

[bootyluvr]

You don't need a radio ^_^

 

[death_roll]

I was on the fence about a front swaybar, being that I won't always have super grippy tires on and I don't have enough negative camber up front to really maximze the added advantages

Installed whiteline 19mm urethane swaybar bushings for the front bar, being that the bushings and endlinks will maximize the effectiveness of the stock bar to its full potential. The reaults were very noticable for only $21.00, quicker turn in and better mid corner stability.



New bushing with the existing WL billet endlinks I installed.

 

[death_roll]

Just purchased this from work....employee discount FTW!

http://www.mishimoto.com/compact-baffled-oil-catch-can-2-port.html

Installing it this weekend.

 

[death_roll]

Installed the catch can just now.

About to be installed, had to buy 5/8" fittings because the supplied 1/2" ones are too small for my PCV system.


Installing the bracket using the supplied self-tapping screws.


Fitting the can, checking the bottom on where to apply weatherstripping to further cushion and support the can from movement while driving.


Weatherstripping installed


Preparing the can


Mounted the can and started to route the hoses. The hose from the crankcase goes to the 'in' port while the hose from the PCV valve / manifold goes to the 'out' port. Air is pulled via vacuum from the PCV, so air / oil vapors travel from the crankcase, into the can, then out to the manifold / PCV valve.


Cut the hoses to fit on the can without too much slack or stress on the can and fittings. Installed spring clamps, tightened the can mounting screws, and done!

 

[highplainsdrifter]

I'm lovin' it!

Damn that car just looks, well I don't know, it just looks 'right'.

 

[death_roll]

I'm lovin' it!

Damn that car just looks, well I don't know, it just looks 'right'.

No showy stancebro **** here, everything is for performance in some way, even though the car is still slow.

 

[death_roll]

Got the RE11s mounted yesterday, as well as put the stoptech pads and flushed with str600 brake fluid.

 

[death_roll]

Got my winter wheels at the junkyard today, 15" Forester steelies, probably going with 195/65R15 tires to keep the same 25" tire height.

Started as grey(ish), cleaned up a bit and painted them black.

 

[bootyluvr]

Pictures of the winter wheels on the douchemobile?

 

[death_roll]

Why are you bumping this??

 

[Nix]

Pics pics... come on man..... How much camber did you have to run to fit those? hahaha

 

[bootyluvr]

Why are you bumping this??

Because I want to see the winter setup on the douchemobile!