KONI Yellows

[W3R0]

I'm thinking of lowering the car, don't want to go the coilover route. I want to lower on springs and I'm of going with H&R. My question is this, I know I will be having to also upgrade my shocks and was wondering if they make the KONI yellow a direct bolt on for the 2012 Si or is there cutting and welding required. What brand are you guys running?

 

[Dar-Dar]

The Koni fronts are inserts so you'd have to cut the front suspension to insert the Konis. However, you can run Koni Orange Front (full bolt on strut) and Koni Rear Yellows (full bolt on).

 

[Pauly99to17]

Good to know. Thanks Dar-Dar. My OEM struts are beginning to feel a little loose. Btw, the non Si would be the same set up right?

 

[Chuckable]

Check out Redshiftmotorsports. There is a video on there showing you how to do the front insert. Or, you can buy it ready-made.

 

[Pauly99to17]

Check out Redshiftmotorsports. There is a video on there showing you how to do the front insert. Or, you can buy it ready-made.

Tried to find this video. Possible to have link?

 

[Chuckable]

I just checked the website and it's been changed. I don't see the video anymore. I bet you could contact Chris and he could give you the link, or you might even find it just by searching on YouTube.

 

[Pauly99to17]

I just checked the website and it's been changed. I don't see the video anymore. I bet you could contact Chris and he could give you the link, or you might even find it just by searching on YouTube.

I sent Chris an e-mail. Thanks.

 

[Chuckable]

He's always been super helpful when I called. He should get back to you soon.

 

[W3R0]

The Koni fronts are inserts so you'd have to cut the front suspension to insert the Konis. However, you can run Koni Orange Front (full bolt on strut) and Koni Rear Yellows (full bolt on).

Thanks alot! Now i just need to make up my mind on what brand springs to get and how low i want to get

 

[nat3d]

this is what a rr coupe looks like with that set up the first pic is of the inherent camber you will get without rear camber arms. imho i love it.

 

[JAYBLS]

Wait... @Dar-Dar there is a Koni orange option for the 9th gen? I don't think there is.