K&N drop in filter

[Loppysaurusrex]

So since my 2013 si is my daily I don't want to play too much with the engine or with bolt on's but I hear the drop in filter from k&n gives a very nice VTEC cross-over noise, can someone confirm?

Also note I have a 2013 si so this is before Honda did the exhaust upgrade

 

[webby]

It isn't going to sound as loud as an actual short ram/cold air intake, but it will increase the sound a bit. If you want additional sound, you could do a free resonator delete -

http://9thcivic.com/forum/threads/resonator-delete-si-sedan.4811/

 

[Loppysaurusrex]

It isn't going to sound as loud as an actual short ram/cold air intake, but it will increase the sound a bit. If you want additional sound, you could do a free resonator delete -

http://9thcivic.com/forum/threads/resonator-delete-si-sedan.4811/

The whole point of the drop in is not having to do a lot of work

 

[squiggy]

The whole point of the drop in is not having to do a lot of work

The resonator delete is not a lot of work...

 

[webby]

The whole point of the drop in is not having to do a lot of work

I was just adding a free suggestion in addition to the filter. It could prob be done in like 15 min or less.

 

[Loppysaurusrex]

The resonator delete is not a lot of work...

Maybe for you, would probably take me hours

 

[Jake LXer]

I don't even think i used tools to do this, maybe a screw driver for MAYBE 1 or 2 screws/clips but the pipe literally just pulls off if i remember correctly. It's a lot easier than having to learn how to drive stick shift which i know you've done seeing as you have an Si

 

[Michal006]

Maybe for you, would probably take me hours

We all had to start somewhere... that's how you gain experience and learn how to work on your own car. Try it

 

[Loppysaurusrex]

I don't even think i used tools to do this, maybe a screw driver for MAYBE 1 or 2 screws/clips but the pipe literally just pulls off if i remember correctly. It's a lot easier than having to learn how to drive stick shift which i know you've done seeing as you have an Si

And what of the jack and removing the wheel?

 

[Loppysaurusrex]

We all had to start somewhere... that's how you gain experience and learn how to work on your own car. Try it

Does the res delete even make it sound better?

I've heard some sound clips but it doesn't sound much different

 

[Jake LXer]

And what of the jack and removing the wheel?

Bro my grandma rotates her own tires, thats the easiest step! Lol but in all seriousness this is a straight forward process and it does make it sound different a little bit but combined with the drop in filter and the res delete it will sound better

 

[webby]

And what of the jack and removing the wheel?

There is a jack in your trunk to remove the wheel.

 

[Jake LXer]

There is a jack in your trunk to remove the wheel.

^What Webby said, but if you have a floor jack i'd recommend using that with a jack stand. Makes it easier on you and IMO i think it's safer