Skunk2 Composite Cold Air Intake!

Discussion in 'Intakes & TB Spacers' started by procivic, Oct 22, 2013.

  1. Armybuff281

    Armybuff281 Well-Known Member

    Messages:
    45
    Location:
    Spartanburg, SC
    Vehicle Model:
    Civic Si
    Body Style:
    4dr sedan
    Its official the new skunk2 intakes are no longer on back order! To bad I spent all my damn money getting the flashpro oh well guess I'll have to wait until next week hopefully they will still have some In stock. Got a good feeling that this will be the best intake for a while I was going to wait for full-race's version but the skunk2 looks very well developed.
     
  2. Jonathong

    Jonathong Well-Known Member

    Messages:
    388
    Location:
    Delano, California
    Vehicle Model:
    Civic SI
    Body Style:
    Sedan
    I wanna know if I can still use my p2r tbs with this also this intake does work with the stock ecu you don't need pf, here's it being confirmed[​IMG]
     
  3. procivic
    • Vendor

    procivic Vendor

    Messages:
    566
    Location:
    Ventura, California
    We haven't installed this combo yet, but I believe the intake will work with the P2R spacer, I think there is enough clearance to allow the intake to be pushed outwards a tiny bit more.
     
  4. Armybuff281

    Armybuff281 Well-Known Member

    Messages:
    45
    Location:
    Spartanburg, SC
    Vehicle Model:
    Civic Si
    Body Style:
    4dr sedan
    Needs an installation VIDEO!!!
     
    kalbo likes this.
  5. YangerD

    YangerD Well-Known Member

    Messages:
    5
    So anyone get them installed yet? Its a great looking intake.
     
  6. procivic
    • Vendor

    procivic Vendor

    Messages:
    566
    Location:
    Ventura, California
    The intakes have already started shipping from us, so they are officially released now. After all pre-orders are fulfilled, we will still have several left, so any new orders would ship immediately!
     
    kalbo and Dennis Rockholt like this.
  7. Dennis Rockholt

    Dennis Rockholt 9k Alll Day

    Messages:
    1,952
    Location:
    Franklin, TN
    Vehicle Model:
    370Z Fairlady aka "Nismo"
    Body Style:
    Coupe
    Cant wait to have the funds and order mine
     
    procivic likes this.
  8. black9th

    black9th Well-Known Member

    Messages:
    48
    Location:
    Norfolk, Virginia
    Vehicle Model:
    Civic Si
    Body Style:
    Coupe
    Just got mine in the mail today! Will post some feedback and hopefully some install pics soon! Thanks @PRO Civic


    IMG_0289.jpg
     
    Last edited: Nov 16, 2013
  9. BlacklistRogue

    BlacklistRogue Well-Known Member

    Messages:
    335
    Location:
    El Paso, TX
    Vehicle Model:
    Civic Si
    Body Style:
    Coupe
    [​IMG]

    Can you say yum
     
    procivic, Armybuff281 and Dar-Dar like this.
  10. BlacklistRogue

    BlacklistRogue Well-Known Member

    Messages:
    335
    Location:
    El Paso, TX
    Vehicle Model:
    Civic Si
    Body Style:
    Coupe
    My write up and step by step written instructions to follow
     
  11. Dar-Dar

    Dar-Dar Mordorator

    Messages:
    19,329
    Location:
    North NJ
    Vehicle Model:
    Civic Si
    Body Style:
    Fiji Blue Pearl Coupe Coolest Member Since: May 15, 2011
  12. BlacklistRogue

    BlacklistRogue Well-Known Member

    Messages:
    335
    Location:
    El Paso, TX
    Vehicle Model:
    Civic Si
    Body Style:
    Coupe
    so far its amazing. noticeable difference IMO. car breaths a lot better and paired with my S2 Header and exhaust it sounds amazing.

    tell you what though the install is no cake walk id put it at the intermediate level.
     
  13. Armybuff281

    Armybuff281 Well-Known Member

    Messages:
    45
    Location:
    Spartanburg, SC
    Vehicle Model:
    Civic Si
    Body Style:
    4dr sedan
    Mine should arrive on Tuesday try and have it up by then please!
     
  14. w00t692

    w00t692 Well-Known Member

    Messages:
    106
    Did i see they quoted 6 hp 8 tq gain from this intake? That's pathetic. They're really selling themselves short trying to sell it without requiring flashpro. I guarantee the gains with flashpro would be upwards of double their figures quoted.

    There's been tons of people that have tried to run this intake (even with the smaller maf housing area) on stock ecu on 8th gens and it runs terribly. Do yourself a favor and either don't buy this without flashpro or just wait to install it til you have both.
     
  15. procivic
    • Vendor

    procivic Vendor

    Messages:
    566
    Location:
    Ventura, California
    What you're saying about the 8th Gen is true...most people did need a FlashPro for it to run best. I'm not sure if this directly applies to the 9th Gen though. We have so far not received any bad feedback or complaints from customers running this intake without a FlashPro. Of course the FlashPro will help a lot in terms of power gains, but I don't think we should jump to conclusion yet that the FlashPro will be required.
     
    Armybuff281 likes this.
  16. procivic
    • Vendor

    procivic Vendor

    Messages:
    566
    Location:
    Ventura, California
    We did an unboxing video of this part, forgot to share it with you guys:



    Let me know if you have any comments about the video, and if you want to see more of these types of videos in the future.
     
    M3kanic likes this.
  17. r18-power

    r18-power Well-Known Member

    Messages:
    1,021
    Location:
    FL
    Vehicle Model:
    Focus ST
    Body Style:
    Hatchback
    @PRO Civic you guys are amazing! I received mine last thursday! I order monday!! Overall I love this intake! This doesnt compare with the ART intake I had.. I ran this intake without flashpro for 2 days and honestly I felt power but not as much as now that im getting tuned by Vit! So I do suggest flashpro for this intake.. Thanks Pro civic for the great customer service and fast shipping!

    [​IMG]
     
    Kevv_Si and procivic like this.
  18. procivic
    • Vendor

    procivic Vendor

    Messages:
    566
    Location:
    Ventura, California

    Glad you like the intake and the extra power from the tune! It really helps open the engine up and the sound is great too.
     
    r18-power likes this.
  19. mySIck

    mySIck Well-Known Member

    Messages:
    1,244
    Location:
    FT. Bragg, NC
    Vehicle Model:
    Civic SI
    Body Style:
    Sedan
    I just finished putting my Skunk 2 CAI in and I am getting a VSA code and if I try and drive over 2800 rpm is cutting out and you can feel the car shake any one else had this problem
     
  20. r18-power

    r18-power Well-Known Member

    Messages:
    1,021
    Location:
    FL
    Vehicle Model:
    Focus ST
    Body Style:
    Hatchback
    Yeah I was having that problem, one of your MAF wires is loose.. check the white wire
     

Share This Page