Good deal?

[Kevv_Si]

Do you guys think this is a good trade. My buddy is going through a divorce and parting out his car...he's giving his damn near brand new enkei rpf1 for my stockies plus $500. I'm soo tempted to do it but I'll be out of stock rims for hibernation etc.

 

[Michal006]

Must not fap...


Spec of the wheels? They look like they are 17"

Your wheels + $450 cash and wait what he has to say

 

[Kevv_Si]

Must not fap...


Spec of the wheels? They look like they are 17"

Your wheels + $450 cash and wait what he has to say

17x9 plus 35 offset. 235 40 17 bf Goodrich GForce TA tires

 

[Michal006]

Do it. They are $1k brand new plus shipping without tires.

 

[Kevv_Si]

Do it. They are $1k brand new plus shipping without tires.

 

[Michal006]

Get em boy.

 

[Kevv_Si]

Get em boy.

Yeah they do look nice huh

 

[webby]

make it happen

 

[Flightmaster127]

That sounds like an exceptional deal to me.

 

[Kevv_Si]

Thanks guys ! Picking them up Saturday!

 

[ADExternal]

Good pickup! I would do it if given the choice.

 

[Nix]

Good deal indeed. The 9" is the RPF size that looks the best IMO.

 

[Michal006]

Good deal indeed. The 9" is the RPF size that looks the best IMO.

Do you think I would rub with this wheels and my car lowered 1.2" at the front and 1" at the back? I also want to have meaty tires too.

 

[ADExternal]

I suspect going down at those measurement will rub on bounces so it depends on your stiffness and spring rates

 

[Michal006]

I suspect going down at those measurement will rub on bounces so it depends on your stiffness and spring rates

That's what I thought. Do you have any issues with your set up? I will either get the RPF1 or HFP 17" wheels.

 

[Kevv_Si]

I suspect going down at those measurement will rub on bounces so it depends on your stiffness and spring rates

I'm even lower I'm at 2.25" front 2" rear

 

[Kevv_Si]

Good deal indeed. The 9" is the RPF size that looks the best IMO.

Do you think I'll need fender work with that measurement ?

 

[ADExternal]

That's what I thought. Do you have any issues with your set up? I will either get the RPF1 or HFP 17" wheels.

I did, in bounces so I rolled my fender for both front and rear as it only rubbed inside fender liner a tiny bit. I didn't want so stiff ride so that's why it did rub as others gone lower without issues with my setup. It really depends on the suspension setup.

 

[ADExternal]

Do you think I'll need fender work with that measurement ?

I can only say guarantee to need fender work if either 1, go lower than 2" with stock coilovers spring rates or 2, drop on springs only.

 

[Kevv_Si]

I can only say guarantee to need fender work if either 1, go lower than 2" with stock coilovers spring rates or 2, drop on springs only.

Fudge. I didn't want to have to mess with my fenders hahaha