Littleshak's "Orange Blossom Special" build

Nomar06 said:
I never put the car on the rack after installing just the springs so I can't give you a definite answer but I went with a camber kit.

I ended up buying the Dorman rear camber arms from Amazon since the are actually SPC arms in a different box and only $90. I also got SPC front camber bolts.
Click to expand...

Would you happen to have the part number or seller info? I looked for them on Amazon and could not find them
 
SlySi said:
Would you happen to have the part number or seller info? I looked for them on Amazon and could not find them
Click to expand...

The listing is for one side so buy 2 of them. 8thgen and 9thgen use the same part so no worries there....

See is this link works.... Amazon product ASIN B00GJ1OP00View: http://www.amazon.com/gp/product/B00GJ1OP00?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s01


If not.....

Seller Dorman
Brand Dorman
Model 521-872
Item Weight 10 pounds
Product Dimensions 12.7 x 6.2 x 6.2 inches
Item model number 521-872
Manufacturer Part Number 521-872
 
I just ordered mine and should have them next week.

SlySi said:
Would you happen to have the part number or seller info? I looked for them on Amazon and could not find them
Click to expand...
The problem is they aren't listed as fitting a 9th (even though they do) so if you search for them that way they won't show up.
 
Nomar06 said:
The listing is for one side so buy 2 of them. 8thgen and 9thgen use the same part so no worries there....

See is this link works.... Amazon product ASIN B00GJ1OP00View: http://www.amazon.com/gp/product/B00GJ1OP00?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s01


If not.....

Seller Dorman
Brand Dorman
Model 521-872
Item Weight 10 pounds
Product Dimensions 12.7 x 6.2 x 6.2 inches
Item model number 521-872
Manufacturer Part Number 521-872
Click to expand...

Than you sir! Sweet! qty 2 in cart. one more thing please any link to the front bolts. might as well :D
 
SlySi said:
Than you sir! Sweet! qty 2 in cart. one more thing please any link to the front bolts. might as well :D
Click to expand...

Look again..just added the link to what I bought.....
 
I would get fronts just to get the fine tuning and "equal" angles on both sides. For 20$ can't really go wrong IMO
 
So i ordered billet pro shop base bushings from corsport 2 weeks ago and not only did i just get my shipment today but i got bps cable shifter bushings and not what i ordered. But on the bright side i ordered a bps short shifter that comes with the same base bushings. Now i just hope i can return these cable bushings and get some hybrid racing cable bushings.
 
That's a let down, I'd ask @CorSport to see if the HR bushings are in stock. They where 2-3 weeks back ordered from lack of supply. Their customer service was very helpful to me so I hope you get the same.
 
I already sent an email to corsport's website, so I'll see what happens.
 
littleshak said:
So i ordered billet pro shop base bushings from corsport 2 weeks ago and not only did i just get my shipment today but i got bps cable shifter bushings and not what i ordered. But on the bright side i ordered a bps short shifter that comes with the same base bushings. Now i just hope i can return these cable bushings and get some hybrid racing cable bushings.
Click to expand...

You should be fine. It's definitely a inconvenience when you waiting for parts and the wrong one arrives. If it's not what you ordered I'm sure they will take care of error.
 
20151002_180357~01.jpg
Got my bps short throw today. :D Tomorrow I'll be digging into my center console to install this bad boy. And I think it's freaking awesome that they actually sent paper clips to hold the tabs open to get the stock one out because I didn't have any.
 
Installed the ss and base bushings today. It's supposed to be a 30% reduction but feels like a lot more. Took it out for a drive and kept thinking i was missing gears but it was in gear. It's going to take a little bit to get used to.
 
littleshak said:
Got them todayView attachment 49737
"dorman" spc rear camber arms
Click to expand...
It must be Christmas, just received my Dorman aka SPC. Confirmed definitely says SPC. That's what I call a great deal. It's like buy one SPC arm and get on free, front bolts are in and PRL clutch line on the way.
@littleshak have you deleted the cdv yet?
 
SlySi said:
@littleshak have you deleted the cdv yet?
Click to expand...
Not yet. I'm waiting to do that, ss clutch line, cable bushings, battery relocate, all at the same time. In preparation for a prl cai, but i want to get the cai and a flashpro at about the same time. But unfortunately i may have to wait until after Christmas for them
 
You must log in or register to reply here.
Back
Top