8thCivic: ERR MAH GAWD...Le Special K Has Cams Now... Time To Rev To The Mooooon!

[Killin]

Hey 9thcivic, figure id post up my build there here even though i have a 8thcivic. im more known over there and i think some of the locals here have seen me and my car. but here it is.


Day one:

Present of how it looks:

Current mods

Engine/Transmission
Injen CAI with hydro shield
Hybrid-Racing Intake (pre-ordered)
Kidd Racing Header (Skunk2 Megapower Header is Here Just Not Installed.)
3in Full Race Exhaust
P2R Throttle Body Spacer With 2 Gaskets
Drag Cartel 2.2 Camshafts
Go-Power 100lb Valvetrain
Hondata Flashpro
Skunk2 Intake Manifold
ZDX Thorttle Body(J37)
RDX 410 Injectors
P113 P2R Thermal IMG
P149 P2R thermal tb gasket
P384 P2R Throttle body adapter for RBC/RRC
Clutchmaster Stage 4 6 Puck Clutch
Competition Ultralight flywheel
TWM Base Bushings
TWM Stage 2 Short Shifter
HR Shifter Cables
HR EM1 CMC
Boomba motor mounts


Interior/Ice
Stock Knob
Custom Shift Boot

Exterior
8000k low beam
OE Fog lights with 8000k
Nokya DRL/Highbeam 3000k
20% tint rear/back windows front are stock for now but will change
JDM H Emblem
HFP Front Lip
HFP Rear Lip
Honda Roof Visor
Mugen Visor's


Tire's/Wheel's/Brake's/Suspension
BC Racing Coliovers
Skunk2 Camber Arms V2
Stock Wheels
Falken Azenis PT-722 225/45/17
Hawk Hps Front and rear pads
OE premium front Rotors
Goodrich Stainless Steel brake lines.
Yospeed Rear Tie Bar


Retired Gear:
TWM Cable Bushings
Blox 490G Shift Knob
Skunk2 440G Shift Knob
Skunk2 Lowering Springs
Mugen Replica Wing
60mm P2R throttlebody Spacer with 2 Gaskets

 

[Killin]

Mods Of 2010


The very first Mod was added to my FA5, 8k VVME HID fog/Low/High Kit

here is my dyno when i was stock. *this was on SRT's dyno Jet*

Next is a Injen CAI

Next is a Kidd Racing Header

next is TWM Cable and base bushings (sorry dont have pictures of the base
after that was a blox shift knob and a custom boot

I/H/E No Flashpro


View: http://www.youtube.com/watch?v=vTrQ6SPxEAQ


View: http://www.youtube.com/watch?v=q5-JEoS4Bzg


View: http://www.youtube.com/watch?v=m8pROD17ZAQ

 

[Killin]

Mods of 2011

Battery tie down:

JDM Front and Rear Badges:

Boomba Mounts (8thcivic crew got it for my birthday)

Flashpro:

99-00 Em1 CMC converison to 8th gen civic with amsoil

P2R Throttlebody spacer with 2 gaskets and napa part 7777

Skunk2 Springs:

VitViper Basemap

Honda Factory Performance front lip

Skunk2 Camber Arms:

 

[Killin]

Mods of 2012

Honda Factory Performance Rear Lip:

E-Tuned:

First Pull

Civic SI Bolt on Si 215hp 163tq - YouTube

Second Pull

Civic SI Bolt on Si 219hp 162tq - YouTube

Third Pull (bounced off Limiter)
Civic SI Bolt on Si 210hp 151tq (Rev limit bounced) - YouTube

TWM Short Shifter:

Hybrid Racing Shifter Cables:

Honda Moon Roof Visor

Clutchmasters Stage 4 clutch and Competition ulrtralight flywheel

Falken Azenis PT-722 225/45/17

Nokya JDM DRL/High beam:

Walbro 255 Fuel Pump:

Hawk HPS front and rear pads and goodridge stainless steel lines (dont have pictures of the OE blank rotors)

Skunk2 Manifold:

 

[Killin]

Mods of 2013:

H1 mini projectors with E55R shroud

My Installer whitecivic10 from 8thcivic.com

And the intake and fuel rail

228hp 160tq 3/30 2013 dynoday - YouTube

Drag Cartel Stage 2.2 Camshafts

Go-Power 100LBS Valvetrain

OEM Z3 head gasket, ARP headstuds with moar awesome sauce

 

[Killin]

Continue of mods of 2013

RSX/Accord TCT with OEM valve seals

K20Z3 timing Chain

Getting installed

Skunk2 MegaPower Header and YoSpeed Rear Tie Bar

my retune with w00t692

 

[Dar-Dar]

Welcome to the site.

 

[FB2Chris]

Clean and simple, I like it

 

[MrsJrotax101]

Welcome!

 

[Killin]

Clean and simple, I like it

Thanks, Thats just how i like it. going to get rims here soon.

Welcome to the site.

Whats going on little buddy.

 

[Killin]

Welcome!

Thanks! I remember you from 8th

 

[MrsJrotax101]

Thanks! I remember you from 8th

I hope that's not a bad thing

 

[Dar-Dar]

Whats going on little buddy.

Little buddy?

Getting tired of 8thcivic?

 

[Killin]

I hope that's not a bad thing

i joined back in 2010 and i think you and few other admins were leaving and such.

Little buddy?

Getting tired of 8thcivic?

eh not really. i mean i just bullshit on the mid ATL thread and my build thread and thats pretty much it.

 

[FB2Chris]

Thanks, Thats just how i like it. going to get rims here soon.

Same here, that's how it should be. Any idea what you're going to get for wheels?

 

[MrsJrotax101]

i joined back in 2010 and i think you and few other admins were leaving and such.

Ahhh gotcha. Yeah that would be atruhondagrl (Damaca), ethlar, and GeezerSi (KennyGS) who were admins with me at the time.
We're here now as well as most of the staff that was there then lol

 

[Killin]

Same here, that's how it should be. Any idea what you're going to get for wheels?

Yes Infact, i will be going with 17x9+35 RPF-1s with either a 235/40 or a 245/40 tire

 

[Killin]

Ahhh gotcha. Yeah that would be atruhondagrl (Damaca), ethlar, and GeezerSi (KennyGS) who were admins with me at the time.
We're here now as well as most of the staff that was there then lol

yeah me and ethar talk almost all the time. and dont forgot about the honorable FBFG aka purpul plane :deadhorse: also is there a way for the images to resize smaller as a user setting or is that a site setting?

 

[MrsJrotax101]

hahaha yes, we took the purpul plane to zaxby's when he came to georgia years back. Had to stock up on teh purpul strawz!

 

[FB2Chris]

Yes Infact, i will be going with 17x9+35 RPF-1s with either a 235/40 or a 245/40 tire

I love that style, one of my favorite wheels.