Anyone Have Spacers on OEM '12, '13 Rims?

hotdogjohnny

hotdogjohnny

Well-Known Member
1,378
755
USA
Vehicle Model
Civic Si
Body Style
Sedan
I put Acura RSX-S rims on a while ago and they have 20mm rear 15mm front spacers to correct the stance. I think that the oem rims' stance would benefit from spacers, too, but have no idea how much. IIRC, someone did 5mm spacers, but no pictures posted. If you have any info, especially pics, I'd like to see them.
 
^^^That's where I got my info on spacers for those rims, but now I want to put my oems on with a slighlty more agressive stance than stock. I like the way my RSX-S rims look and want the same for the oems.

Here are the present rims:
20mm 15mm 3.jpg
 
@Sleepingpanda has spacers, but he's not on stock wheels.

Are you thinking about going back to stock...or you are on stock wheels now? Take a measurement from the rip to the edge of the fender and see what that is. Convert it to mm, and that gives you an idea on how much you could push them out towards the fender.
 
^^^Thinking about going back to stock. Want a little more agreesive stance than I recall when stock.
 
according to a thread on clubrsx -
Stock Offset and Sizes-
'02-'04: 16x6.5" with +45mm offset.
'05-'06: 17x7" with +45mm offset.

The 2012 si has 17x7 +45 stock, so you'd be looking at the identical spacer setup
 
Hmmm. For some reason, the RSX rims seemed really inset w/o spacers. I'll do some measuring.
 
You must log in or register to reply here.
Back
Top