Balt15Si
Well-Known Member
- 51
- 14
I've been listening to different axle backs for the Si, and I think the Injen set up sounds the best, does anyone have any views or opinions on it?
Last edited:
Anyone running Injen cat back?
- Thread starter Balt15Si
- Start date
- Staff
- #2
- 56,739
- 24,147
The Injen is just an axle back setup. I’ve seen a couple of people buy them, but most tend to go cat back.
- Thread starter
- #3
Balt15Si
Well-Known Member
- 51
- 14
Now I'm hearing that these after market exhaust systems have a bad drone at highway speeds, does anyone know of any that don't have this issue?
sunofwolf
Well-Known Member
- 2,376
- 178
- Vehicle Model
- Civic SI
- Body Style
- Coupe
the problem is not enough mufflers, too small resonators. UR has the best exhaust setup I know but its not cheap. Twin Mufflers. My thermal exhaust 3" on srt-4 has one very big muffler and makes less noise than a stock srt-4. the Q300 has a large muffler, but I think its actually too big as it has clearance problems and must be very heavy. I am happy to replace that awful honda exhaust and stock tune. But don't forget I am very sound sensitive that why I paying $185 for the second muffler setup 3" all the way though, I did cheap out a little with the cnt catted downpipe, but it is a quality piece. So my setup is CAI 3.5, catted downpipe 3" with catback exhaust 3" with twin muffler's and tuned by etunez. I wanted to perhaps go to FI later on. So I can go by by my sickly.
Last edited:
- Thread starter
- #5
Balt15Si
Well-Known Member
- 51
- 14
I wanted something that sounded a bit deeper and a little louder, from the YouTube videos I've seen the axle back Injen setup sounded great, but I'm now concerned with droning
sunofwolf
Well-Known Member
- 2,376
- 178
- Vehicle Model
- Civic SI
- Body Style
- Coupe
Well try it out maybe it will work, droning maybe impossible to totally get rid of in a performance exhaust.
dpetro1
Well-Known Member
sunofwolf
Well-Known Member
- 2,376
- 178
- Vehicle Model
- Civic SI
- Body Style
- Coupe
Well looks at the expects said 
- Thread starter
- #10
Balt15Si
Well-Known Member
- 51
- 14
Thanks R18, good to hear
RyanR47
Well-Known Member
- 9
- 6
- Vehicle Model
- Civic Si
- Body Style
- Coupe
Hey any update if you got this part? I'm thinking between just doing the Injen axle-back or go Magnaflow catback (double the $$ but that's not an issue for me)
