BC racing coilovers clunking HELP!

[Swoleluc]

Hey I recently install my coilovers and everything went find and after I took for a test drive I went on my driveway, and I started to here a clunk sound. Please help

 

[webby]

torque specs on the suspension can be found here...
http://www.collegehillshonda.com/instructions/civic/2012/4dr/civic_torque_specs.pdf

I'd imagine something is loose

 

[Nix]

Yeah, I bet that something shifted once their was load on the parts. Just go back and re-torque everything. Also make sure the springs are seated properly everywhere.

 

[Swoleluc]

Yeah. I went and use a air gun to tighten everything down. I can only here the clunking when im going up on a driveway not when im driving

 

[Nix]

So you retightened and it's still doing it? If it's low speed I bet one of the springs isn't seated or the end of the coil is hitting the top hat funny. Someone else posted something similar. Perhaps loosening the hat on the offending side and rotating the spring slightly may help?

 

[Swoleluc]

Ok thx

 

[Swoleluc]

I figured it out. I just compress the springs and adjust the shocks and no more clunking

 

[Nix]

Nice. So it was just the spring being a little loose and moving?

 

[Swoleluc]

Yeah