First e-dyno from Vit

twister8008

twister8008

Well-Known Member
Messages
859
Reaction score
480
Location
Omaha, NE, but I am a Wisconsinite
Vehicle Model
Civic SI
Body Style
Coupe
My mods:

Boomba racing torque mounts
Full Race catted downpipe
HFP suspension
Progress 24mm sway bar
Flash pro

gvsLLQ9.png
 
are you tuned from vitviper...or is this using the reflash map from hondata?
 
All, my tune is complete. Tuned by Vit. I now have the Full Race exhaust as well. Are these good numbers? I thought I would be higher with a full exhaust and tune. Thanks for your comments! :-)
7aja4y9u.jpg
 
Last edited by a moderator:
Man its only making 179 with full exhaust and tune? I almost feel like I wasted $1400 dollars for a 5 hp gain if that is the case
 
twister8008 said:
All, my tune is complete. Tuned by Vit. I now have the Full Race exhaust as well. Are these good numbers? I thought I would be higher with a full exhaust and tune. Thanks for your comments! :)
7aja4y9u.jpg
Click to expand...

I just cant believe that. Seriously that's way lower than I thought it would be.
 
  • Like
Reactions: raf
twister8008 said:
All, my tune is complete. Tuned by Vit. I now have the Full Race exhaust as well. Are these good numbers? I thought I would be higher with a full exhaust and tune. Thanks for your comments! :)
7aja4y9u.jpg
Click to expand...

Not sure if I'm understanding you correctly, but did you add the exhaust after the tune?
 
Also do you have a pic of your civic. I want to see how the car sits with an hfp suspension that has settled.
 
Downpipe and exhaust only made 179? It just baffles me and makes me worry for my results, because my tune is getting closer to getting done
 
From Vit's site. I have a 12 inch sub, amp, and I had my daughter in the car with me.

"For an accurate eDyno I need the following (if this isn't provided I use the defaults of FG2 + 180lb driver, no SAE correction):Vehicle weight (typically "FG2 or "FA5" works as I know those weights)Weight of junk in the car and all occupants (driver, passengers, subwoofers, etc)Road must be LEVEL with NO turns or bumps. Those WILL affect the power curve.If you want the eDyno SAE corrected (for weather), I need the following from the time of the pull:Humidity (%)Temperature (*F)Barometric Pressure (in.Hg.)Elevation (ft)"
 
twister8008 said:
All, my tune is complete. Tuned by Vit. I now have the Full Race exhaust as well. Are these good numbers? I thought I would be higher with a full exhaust and tune. Thanks for your comments! :)
7aja4y9u.jpg
Click to expand...
Not much of a gain for a 3 inch exhaust. Were you going uphill?
 
Numbers don't really matter, how does the car feel?
Does the increase in power that you feel justify the cost?
 
I am going to ask vit run the numbers again with compensation for an extra 100 lbs in the car. I also think he may have used one of my "fun" engine pulls and not the first one on flat ground. Oh well, it FEELS awesome! :-)
 
I'm gonna ask for an edyno with tonites datalog since we are almost done tuning. I found the best road for the wot runs.
 
You must log in or register to reply here.
Back
Top