k24z7 make composite cam angle map

[red13devil]

Can someone share in with some stock cam setting for the k24z7 motor since our cams set up from flashpro is pretty low, the highest I see on low cam is 40 and highest on high cam is under 30. I see the 8th gen are at 50 rite after vtec, want to bump my up but scare of valve to piston contact?

 

[squiggy]

VitViper may be able to provide some input on this.

 

[9000 RPM]

I believe you'd need a 50° VTC gear.

 

[VitViper]

Max safe VTC is 45 on the K24 and the ECU/hardware can already do this in stock form.

 

[red13devil]

Thanks vit for the input, I was going to go 50 but lucky I wait so 45 well do