DIY RBC, ZDX, PRL Install Tips and Discussion

[Gilles LeClair]

I believe the j35 tb and oem si tb have the same inlet diameter. I just measured my stock tb at 67mm

Sent from my SM-G920V using Tapatalk

From another post -

The J35 TB is 68mm from the intake side tapered to 65 mm to the IM

I was more concerned about the 4 bolts from the TB lining up with the IM
If the J35 TB has a wider opening, i'll have it port matched. Heard it might not do much but might as well do it while its out.