• A large amount of updates and changes have been implemented. Users who have been using tapaptalk will need to access the site in their phone browser. You should see a big difference between the desktop/tablet/phone styles to make navigation and site options easier to use. If you come across any strange behavior, or errors, please report them in this thread. If you have any issues logging into the site, please delete all 9thcivic cookies and then log into the site. https://9thcivic.com/forum/threads/site-changes.16518/

DIY RBC, ZDX, PRL Install Tips and Discussion

Gilles LeClair

Well-Known Member
173
105
Moncton, NB. Canada
Vehicle Model
Civic Si
Body Style
Sedan
I believe the j35 tb and oem si tb have the same inlet diameter. I just measured my stock tb at 67mm

Sent from my SM-G920V using Tapatalk

From another post -

The J35 TB is 68mm from the intake side tapered to 65 mm to the IM

I was more concerned about the 4 bolts from the TB lining up with the IM
If the J35 TB has a wider opening, i'll have it port matched. Heard it might not do much but might as well do it while its out.
 
Top