si foot pads

[12civic5speed]

can you put the si foot pads on a non si car?

 

[webby]

Don't know if CorSport has tried this out or not?

The 8th gen pedal set by strut king worked in non-SI cars. (Corsport has a test car, so I tagged them.)

http://www.corsportusa.com/store/catalog/product_info.php?products_id=3123

 

[12civic5speed]

i really like the si pads i want them in my ex but idk if it would work or not

 

[CorSport]

I can almost promise you the pedals would cross over​

 

[12civic5speed]

what would be involved in changeing fthem

 

[webby]

You need:

1. Power drill
2. 7mm socket wrench
3. Ratchet with 7mm socket (optional)
4. Phillips screwdriver
5. Some cleaning supplies (optional)
6. 15-20 minutes (may vary)
7. a box to catch the metal pieces from drilling =)

Before you drill the plastics, I'd like to ask you to go easy on them.
Keep the drill straight, you dont want the hole too big for the self tapping screws
If anything, drill a small hole to 'track' the self tapping screws and let it do the rest

I found it easier to mount the metal piece onto the rubber and put all the studs through the holes,
then place them on the pedal. You can try putting the rubber piece on the pedal then the metal piece over it.
See which works better for you.

 

[12civic5speed]

any part numbers on the si pads?

 

[webby]

those are strutking pedals from the link in post 2 installed.

 

[12civic5speed]

wonder if i can order them from honda

 

[webby]

(2) #10's and a number 1?
http://www.collegehillshondaparts.com/find-parts/Honda/CIVIC/2012/2DR SI/KA6MT/PEDAL

I'd call, as I have no clue if that's really going to work?

 

[12civic5speed]

good idea