Skunk2 Dropsprings

FG4 Pjay

FG4 Pjay

Well-Known Member
Messages
222
Reaction score
80
Location
Guam
Vehicle Model
Civic Si
Body Style
Coupe
I have a 2013 Si coupe and im playing on getting the skunk2 dropsprings.
The drop springs drop 2.25" front and 2.00" rear.
Im just worried if ill rub tire really bad after installing.
Please help...
 
it will look good as hell though! that is a perfect drop in my opinion. it is no "hella flush" but its clean and practical.
 
lol I had no idea where that comment came from
 
my drop was 1.75 and i had absolutly no need for rear camber adjustments. in fact my rear camber was still in spec. now at 10 k with perfect tire wear.
 
pretty much everyone has said 2" and over...it will not be in spec. Numerous have posted their alignment spec sheets before/after.
 
The H&R springs had my rear camber all effed up and its only 1.4 in the rear. I wouldn't say it stays in spec everytime the time.
 
Michael Perez said:
The H&R springs had my rear camber all effed up and its only 1.4 in the rear. I wouldn't say it stays in spec everytime the time.
Click to expand...
thats odd...mine was fine after a toe adjustment. i wish i took a picture of the specs. i can next rotate when i check it.
 
Glockcoma said:
mine is 1.4 then aswell. H&R springs here too....mistype up there on drop, sometimes i have wishful thinking.
Click to expand...
So will i be good with just the skunk2 drop springs?
 
FG4 Pjay said:
Why would i need the camber kit?
Click to expand...
your car will be out of spec after dropping it 2+ inches. The camber kit will help you correct it. Otherwise, you'll end up with uneven tire wear.
 
webby said:
your car will be out of spec after dropping it 2+ inches. The camber kit will help you correct it. Otherwise, you'll end up with uneven tire wear.
Click to expand...
i can use these springs with my factory shock absorbers and experience no problems?
 
You must log in or register to reply here.
Back
Top