Subaru BBS wheels!!

Michael Perez

Michael Perez

Well-Known Member
Messages
556
Reaction score
154
Location
Miami, FL
Vehicle Model
2012 Civic Si
Body Style
Sedan
They are finally installed! And I love them!

image.jpg

Fresh gloss black powder coat.

image.jpg

20mm spacers used to clear the centerbore

Sorry for the dirty tires. But I love the 215/45 on an 8in wide wheels its a very minor stretch.

image.jpg

I love how they turned out!
 
I remember reading a lot about this when you were first thinking of doing it. Nice to see it finished! Looks good too!
 
Any idea of what they ended up costing you after all the smoke cleared? I was looking at spacers to run the Acura CL wheels I picked up, but paying $ 200 ish for 4 is a bit steep IMO.
 
Thanks man!
and 300 for the wheels 360 for sand blast and powder coat 240 for custom spacers and mounting hardware 30 for gorilla black spline drives and 135 for mounting balancing and installation. Lugmanusa can get you hooked up with spacers and hardware though he's really nice and educated at what he does.
 
No I didn't get any of those. But I did see it. What do u want to know?
 
Ohhh. Well it's got some really short lug nuts to fit in the counterbores. The lugs stuck out of the spacer less than 1/8th of an inch but the wheels had deep enough pockets on the back where I didn't have to cut the lugs.
 
looks like tuner lugs? if so you need stock style lugs for these bbs wheels...if not n/m and carry on ;)
 
I used gorilla tuner spline drives. The factory lug nuts has a different seat
 
you should take a better picture maybe from far away but semi close (lol) side view?
 
You must log in or register to reply here.
Back
Top