- Staff
- #21
- 56,898
- 24,202
Looks good man ^
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
The micro machine, 2016 Fiesta ST
- Thread starter Nomar06
- Start date
- Thread starter
- Staff
- #23
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
She was pissed cause I wouldn’t let her out past the garage.
- Thread starter
- Staff
- #24
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
Added a Mountune panel filter a few weeks ago and got a bike rack today.
Kuat Sherpa 2.0
Kuat Sherpa 2.0
- Staff
- #25
- 56,898
- 24,202
Matchy-matchy 
- Thread starter
- Staff
- #26
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
Clean car is clean....
Put the rack to the test today....
Put the rack to the test today....
- Staff
- #27
- 56,898
- 24,202
Fiesta is so much more narrow than the bikes!
- Thread starter
- Staff
- #28
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
Did a DIY symposer(fake noise maker) delete. Put in a $3 expansion plug in the side of the symposer that goes to the pipe going into the passenger cabin. Car is quite quiet now and still looks like nothing was done.
Took the car into the dealership for an oil change. It was $5 more than it would of cost for me to do it, so might as well let them do it and change a bunch of other fluids and crap.
Took the car into the dealership for an oil change. It was $5 more than it would of cost for me to do it, so might as well let them do it and change a bunch of other fluids and crap.
- Thread starter
- Staff
- #29
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
It looks worse than it is but the tires on the bikes stick out a couple inches on both sides.
- Thread starter
- Staff
- #30
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
Finally got around to making some DIY bumper plugs. Found some plastic plugs at Home Depot that would fit the bumper holes and wrapped them with some vynil.
- Staff
- #32
- 56,898
- 24,202
he only has to have a rear plate in NC
- Thread starter
- Staff
- #34
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
It would kill me too. Its not mandated in NC but for some stupid reason Ford makes all the dealers put the tag holder on there when the cars arrive, even if that state does not require a front tag.
Yeah I'm with you Ron.
Maryland you are required front and rear also. It looks so much better without a front plate. But they can pull you over for no front plate and then give you other tickets.. :/ Not worth the risk.
bfaided1984
Well-Known Member
Thats a good looking ride. Didn't know those things made that much power stock.
Where's @Nomar06 been?
- Thread starter
- Staff
- #39
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
Somewhere
- Thread starter
- Staff
- #40
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
About 3 weeks ago I ran over a chunk of metal or something like it. I was getting on the highway on a curved shirt on ramp(use is everyday). I was checking over my left shoulder for cars and car drifted a little right. As I was turning my head back straight.....bam! Hit the chunk.
Dented the front right wheel and cut the entire sidewall of the tire. Ended up putting the spare on the side of the highway in my full work attire.
Put on a used tire and luckily the wheel holds air.
Dented the front right wheel and cut the entire sidewall of the tire. Ended up putting the spare on the side of the highway in my full work attire.
Put on a used tire and luckily the wheel holds air.