DIY ADExternal's 2012 Honda Civic Reverse Backup Camera DIY

Doggeh_

Active Member
17
4
Boca Raton, FL
Vehicle Model
Civic
Body Style
Sedan
If I want a car audio installation expert to install this, is there a possibility that they can botch this?
 

ADExternal

Lvl: 99 Modifier
1,917
1,535
Houston, Tx
Vehicle Model
Civic Ex
Body Style
Coupe
hmmmm probably not, it depends on how confident they are.
 

Pauly99to17

Well-Known Member
9,176
6,576
Ville de Quebec
Vehicle Model
2012 LX
Body Style
Dyno Blue Pearl Sedan (FB2)
Hey ADX,
When you post how to install the DVD player and reverse camera onto the i Mid, will you put the DIY in this thread or start a new one?
 

Doggeh_

Active Member
17
4
Boca Raton, FL
Vehicle Model
Civic
Body Style
Sedan
So, I want to do this myself and have never done anything like it before. Its seems pretty straightforward to me, do you have any advice?
 

ADExternal

Lvl: 99 Modifier
1,917
1,535
Houston, Tx
Vehicle Model
Civic Ex
Body Style
Coupe
Two main points I would advise. 1, When you are doing this project or any that is electrical/circuit base. Make sure you check every connection 2-3 times that they are secured before moving on. 2, when removing trims and car pieces, do it gradually and dont put pressure unless you are sure because once its broken or dented, it will bug you every time you drive until you replace it.
 

ADExternal

Lvl: 99 Modifier
1,917
1,535
Houston, Tx
Vehicle Model
Civic Ex
Body Style
Coupe

Jp808

Well-Known Member
8
5
Nice diy Ade, really straightforward, main thing is checking the connections to the imid, be sure its in good or else connections will get pushed out when connecting, other than that its pretty simple
 

Doggeh_

Active Member
17
4
Boca Raton, FL
Vehicle Model
Civic
Body Style
Sedan
It' not thouroughly explained as to what I do with the stripped RCA cable. I have 3 wires sticking out.. IDK what to connect them to.
 

ADExternal

Lvl: 99 Modifier
1,917
1,535
Houston, Tx
Vehicle Model
Civic Ex
Body Style
Coupe
It' not thouroughly explained as to what I do with the stripped RCA cable. I have 3 wires sticking out.. IDK what to connect them to.

During the strip/prep part, its says that the third red wire is ignored, one is ground, the other is vid. Those two will connect to the wires running to the front as video feed. And of course the RCA male end is connected to the yellow RCA female end that is coming out of the camera. If you look at the diagram, it reassures you to do so as well.
 

323

Modifier
5,252
3,682
Chicago
Vehicle Model
Civic Si
Body Style
Sedan
During the strip/prep part, its says that the third red wire is ignored, one is ground, the other is vid. Those two will connect to the wires running to the front as video feed. And of course the RCA male end is connected to the yellow RCA female end that is coming out of the camera. If you look at the diagram, it reassures you to do so as well.
So in theory, couldn't you connect anything that uses an rca video plug?
 
Top