exhaust question

raf

Well-Known Member
177
88
Saint Louis, Missouri
Vehicle Model
honda civic si
Body Style
sedan
so im pretty low and ive scraped my exhaust so much that it has so many leaks and sounds ricy (70mm tsudo catback) i have a hf full race dp and a k&n sri and i wanted to put my stock exhaust back on what do u have think? like would i loose alot of power? would my engine struggle at all cuz the stock piping is small just state youre opinion pleaseeeeee thanks because i really dont feel like spending $600+ on pipes anymore lol
 

Dar-Dar

Mordorator
19,329
9,900
North NJ
Vehicle Model
Civic Si
Body Style
Fiji Blue Pearl Coupe Coolest Member Since: May 15, 2011
Yes. Dropping from a 70mm to a 60mm is a pretty significant percentage decrease in cross sectional area.

70mm: 3846.5mm^2

60mm: 2826mm^2

That's a X-sectional area decrease of 26% (1020.5mm^2/3846.5mm^2).

Also, I'm not sure if the stock exhaust can be bolted to a 3" DP.
 

323

Modifier
5,252
3,682
Chicago
Vehicle Model
Civic Si
Body Style
Sedan
If you scraped holes in the tsudo, you'll eventually scrape holes in the stock exhaust if you put it back on and you'll just continue that cycle with new exhausts... So I would take squiggy's advice and just raise the car a little
 

Dennis Rockholt

9k Alll Day
1,952
869
Franklin, TN
Vehicle Model
370Z Fairlady aka "Nismo"
Body Style
Coupe
Definitely get a tune if you have a DP.....huge difference from what I am told. I am getting both ordered for mine in roughly a week or so
 

raf

Well-Known Member
177
88
Saint Louis, Missouri
Vehicle Model
honda civic si
Body Style
sedan
got about 3 tickets on my name:/ soon as i take care of those fp on its way :)) and good luck hope it works out for u
Definitely get a tune if you have a DP.....huge difference from what I am told. I am getting both ordered for mine in roughly a week or so
 
Top