First e-dyno from Vit

[twister8008]

My mods:

Boomba racing torque mounts
Full Race catted downpipe
HFP suspension
Progress 24mm sway bar
Flash pro

 

[webby]

are you tuned from vitviper...or is this using the reflash map from hondata?

 

[twister8008]

Tuned by Vit

 

[twister8008]

All, my tune is complete. Tuned by Vit. I now have the Full Race exhaust as well. Are these good numbers? I thought I would be higher with a full exhaust and tune. Thanks for your comments!

 

[Dennis Rockholt]

Man its only making 179 with full exhaust and tune? I almost feel like I wasted $1400 dollars for a 5 hp gain if that is the case

 

[Dennis Rockholt]

All, my tune is complete. Tuned by Vit. I now have the Full Race exhaust as well. Are these good numbers? I thought I would be higher with a full exhaust and tune. Thanks for your comments!

I just cant believe that. Seriously that's way lower than I thought it would be.

 

[Word3k]

All, my tune is complete. Tuned by Vit. I now have the Full Race exhaust as well. Are these good numbers? I thought I would be higher with a full exhaust and tune. Thanks for your comments!

Not sure if I'm understanding you correctly, but did you add the exhaust after the tune?

 

[Word3k]

Also do you have a pic of your civic. I want to see how the car sits with an hfp suspension that has settled.

 

[twister8008]

This is with my Full exhaust installed

 

[Dennis Rockholt]

Downpipe and exhaust only made 179? It just baffles me and makes me worry for my results, because my tune is getting closer to getting done

 

[twister8008]

From Vit's site. I have a 12 inch sub, amp, and I had my daughter in the car with me.

"For an accurate eDyno I need the following (if this isn't provided I use the defaults of FG2 + 180lb driver, no SAE correction):Vehicle weight (typically "FG2 or "FA5" works as I know those weights)Weight of junk in the car and all occupants (driver, passengers, subwoofers, etc)Road must be LEVEL with NO turns or bumps. Those WILL affect the power curve.If you want the eDyno SAE corrected (for weather), I need the following from the time of the pull:Humidity (%)Temperature (*F)Barometric Pressure (in.Hg.)Elevation (ft)"

 

[Dennis Rockholt]

If my gains are only around 180hp I am done modding. And just keeping my car as is, full-exhaust and tune cost around 1500$ and I just cannot justify that to myself now.

 

[ErckleSi]

It also depends on how high you are above sea level

 

[njhustler]

All, my tune is complete. Tuned by Vit. I now have the Full Race exhaust as well. Are these good numbers? I thought I would be higher with a full exhaust and tune. Thanks for your comments!

Not much of a gain for a 3 inch exhaust. Were you going uphill?

 

[Dennis Rockholt]

Yeah I'm shocked at the numbers yielded

 

[ErckleSi]

My mods:

Boomba racing torque mounts
Full Race catted downpipe
HFP suspension
Progress 24mm sway bar
Flash pro

I bet your car feels better than stock tho!

 

[323]

Numbers don't really matter, how does the car feel?
Does the increase in power that you feel justify the cost?

 

[twister8008]

I am going to ask vit run the numbers again with compensation for an extra 100 lbs in the car. I also think he may have used one of my "fun" engine pulls and not the first one on flat ground. Oh well, it FEELS awesome!

 

[njhustler]

I'm gonna ask for an edyno with tonites datalog since we are almost done tuning. I found the best road for the wot runs.

 

[twister8008]

Also do you have a pic of your civic. I want to see how the car sits with an hfp suspension that has settled.

She is a bit dirty