ronrico418
Active Member
- 25
- 21
New Member 2013 Sedan
- Thread starter ronrico418
- Start date
- Thread starter
- #2
ronrico418
Active Member
- 25
- 21
first thing Im thinking is take off the pinstripes and visit my tinter.
- Staff
- #4
- 25,544
- 10,598
Welcome to the forum! I think the removal of the pinstripes and getting tint is a great idea!
What about removing the i-vtec stickers for an extra clean look? That's up to personal taste though
What about removing the i-vtec stickers for an extra clean look? That's up to personal taste though
ADExternal
Lvl: 99 Modifier
Great ideas to start off! Really cant wait to see what else you are going to do! You could also start a Build Thread for others to follow as you progress.
http://9thcivic.com/forum/forums/build-threads.144/
http://9thcivic.com/forum/forums/build-threads.144/
- Thread starter
- #7
ronrico418
Active Member
- 25
- 21
I have plans for a supercharger after 35k mileswelcome to the site manapart from the pinstripe delete and tint you have anything else planned?
Some high end audio probably sooner than later, leaning towards Audison Mille components ran active. Does anyone know how i keep the setup features from my stock stereo when leaning towards Pioneer or Alpine DVD double din settup
I am considering how to lower some with either springs or some type of coilovers, lots of research to do.... open for suggestions.
- Thread starter
- #8
ronrico418
Active Member
- 25
- 21
I think the pinstripes look sharp and they did a perfect job on them but if Chip Foose was building one of these he would follow a different line. As good as they look I think the pinstripes are taking away from other contours of the body. Thems gotta go!WelcomeRemoving the pinstripes was the first thing I did when I bought my car.
- Thread starter
- #9
ronrico418
Active Member
- 25
- 21
I like the Vtec logo but probably no other stickers. Would probably delete logo if I do a body kit but not sure yet.
- Thread starter
- #10
ronrico418
Active Member
- 25
- 21
Thanks for quick response and welcoming a new member to the 9th gen fam.... Very much appreciated... I just ordered about $400 worth of really good detail supplies
nat3d
MrsJrotax101
FB2Chris
ADExternal
nat3d
MrsJrotax101
FB2Chris
ADExternal
- Staff
- #11
- 52,105
- 22,314
Welcome to the site. You should add yourself to the user map -
http://9thcivic.com/forum/threads/member-locations-user-location-map.5772/
agree with you on the pinstripes/tint. It'll look good
http://9thcivic.com/forum/threads/member-locations-user-location-map.5772/
agree with you on the pinstripes/tint. It'll look good
- Thread starter
- #12
ronrico418
Active Member
- 25
- 21
done
- Thread starter
- #14
ronrico418
Active Member
- 25
- 21
nat3d, Thanks for your continued hospitality
Late last night, I found myself staring at my car after having spent several hours on this very sight looking at other Si's. After feeling 9th gen inspired, I believe, I really like the Honda type R red badges Made in Japan that some members have modded. Does anyone hate those? I'm open to opinions and views and am currently leaning towards making a small purchase.
I will start a build thread this week after tint, pinstripe delete pics.
Also think I'm leaning towards Eibach Springs 2" front 1.5" rear or somewhere around there. Just a simple static drop for now, to ensure I don't catch any nosebleeds from being at such a constant high altitude. I red more than one post about springs settling..... Would it be best to let it settle for 2 weeks w/o driving to much or does it have to be driven a lot.
Can I just do springs or will I have to add something else?
Late last night, I found myself staring at my car after having spent several hours on this very sight looking at other Si's. After feeling 9th gen inspired, I believe, I really like the Honda type R red badges Made in Japan that some members have modded. Does anyone hate those? I'm open to opinions and views and am currently leaning towards making a small purchase.
I will start a build thread this week after tint, pinstripe delete pics.
Also think I'm leaning towards Eibach Springs 2" front 1.5" rear or somewhere around there. Just a simple static drop for now, to ensure I don't catch any nosebleeds from being at such a constant high altitude. I red more than one post about springs settling..... Would it be best to let it settle for 2 weeks w/o driving to much or does it have to be driven a lot.
Can I just do springs or will I have to add something else?
nat3d
Wait, I don't drive a civic anymore....
oh god no problem at all man. as far as your first question i like them but dont own them because i dont like the chrome H (and i just havent felt like dropping that much on emblems and overlays.) also its YOUR car do what YOU want we here at 9thcivic value everyones opinion and respect their chosies (unlike other forums) if you like them add them. as far as springs i dnot know that much. many other members have lowered. i have not..... yet. maybe @Nix could chime in. i just know he has helpped me with suspension before. i also am intersted because i wanna do coils this spring.
Nix
Jötunn Moderator
Hey ron, welcome to the site! Sounds like you've already got some big plans in the works with the SC once you get some miles rung up.
As far as the badges go... if you like it - do it. If you get tired of the red you can always get vinyl overlays and completely change the color. The red "JDM" badges are often "replicas" or... well... just plain fake. Don't be fooled by price either. Full price ones can and have been sold even though they were reps. You can get cheap replicas on amazon for like $20 if you're just gonna cover them with vinyl but fitment may be an issue. I recommend the real deal just for the fitment issue alone. I can't stand gaps and poor placement or sizing. If the reps were spot on other than color and finish id say go for it.
Hit up some of the forum sponsors and you will always get taken care of. You'll probably find lots of other stuff on their sites that you "need" as well. hahaha.
www.corsportusa.com - go check these guys out for legit JDM emblems and tons of other parts.
www.grfxp.com - for vinyl stuff... its kinda hard to find so ill drop some links.
emblem overlays:
http://grfxpstore.com/store/product/885037099
overlay main page:
http://grfxpstore.com/store/search/results?search_query=overlay&x=-439&y=-137
Upgraded suspension is always a win. It all just depends on budget, goals for the car, and what you want to get out of it. I can definitely help you with some suggestions but just give me an idea what you're thinking and ill try and give some advice.
I think the best place to start is with an upgraded rear sway bar. Progress makes a 22mm and a new larger 24mm. Best bang for the buck performance wise. You can feel it right away. It's a quick, easy, bolt on project, takes maybe 1.5-2 hours, and there are DIY guides on here as well.
Allright so sorry for the long post but let us know what you're thinking and where you want to go. Tons of helpful people here who are definitely willing to guide and suggest things.
As far as the badges go... if you like it - do it. If you get tired of the red you can always get vinyl overlays and completely change the color. The red "JDM" badges are often "replicas" or... well... just plain fake. Don't be fooled by price either. Full price ones can and have been sold even though they were reps. You can get cheap replicas on amazon for like $20 if you're just gonna cover them with vinyl but fitment may be an issue. I recommend the real deal just for the fitment issue alone. I can't stand gaps and poor placement or sizing. If the reps were spot on other than color and finish id say go for it.
Hit up some of the forum sponsors and you will always get taken care of. You'll probably find lots of other stuff on their sites that you "need" as well. hahaha.
www.corsportusa.com - go check these guys out for legit JDM emblems and tons of other parts.
www.grfxp.com - for vinyl stuff... its kinda hard to find so ill drop some links.
emblem overlays:
http://grfxpstore.com/store/product/885037099
overlay main page:
http://grfxpstore.com/store/search/results?search_query=overlay&x=-439&y=-137
Upgraded suspension is always a win. It all just depends on budget, goals for the car, and what you want to get out of it. I can definitely help you with some suggestions but just give me an idea what you're thinking and ill try and give some advice.
I think the best place to start is with an upgraded rear sway bar. Progress makes a 22mm and a new larger 24mm. Best bang for the buck performance wise. You can feel it right away. It's a quick, easy, bolt on project, takes maybe 1.5-2 hours, and there are DIY guides on here as well.
Allright so sorry for the long post but let us know what you're thinking and where you want to go. Tons of helpful people here who are definitely willing to guide and suggest things.
- Staff
- #18
nat3d
Wait, I don't drive a civic anymore....
yeah i went through redshift for my sway bar and was happy so ill probably use them again. i just need a little direction in exactly what i want
- Staff
- #20