- Thread starter
- #81
Ordered this at the end of last week. It got delivered last night
2007 Subaru WRX STi
- Thread starter bootyluvr
- Start date
- Thread starter
- #82
OEM Car Cover was delivered yesterday.
Also found this used Cobb catback on one of the FB groups. I use to run this on my '07 WRX and liked it. I will be taking off the Invidia Q300 catback and sell it.
Also found this used Cobb catback on one of the FB groups. I use to run this on my '07 WRX and liked it. I will be taking off the Invidia Q300 catback and sell it.
- Staff
- #83
- 57,250
- 24,288
Cobb a little louder I’m guessing?
stilletto
Well-Known Member
Bit tamer if anything. No?
Sent from my Pixel 3 XL using Tapatalk
Sent from my Pixel 3 XL using Tapatalk
- Thread starter
- #85
Should be the same loudness. I think when I go aftermarket downpipe it will be quieter with the Cobb.
The tip on the Q300 is larger than the Cobb. --- 101mm/4" (Q300) vs 88.9mm/3.5" (Cobb)
- Thread starter
- #86
Cobb Catback has been installed. Invidia Q300 has been sold (to a buddy).
Car Cover tested
Headunit Installed.
Car Cover tested
Headunit Installed.
- Staff
- #87
- 57,250
- 24,288
Are you happy with the exhaust change? Noticeable difference?
- Thread starter
- #88
There is a bit of difference in tone/sound but not much. I like the smaller tip and smaller muffler on the Cobb vs the Invidia.
- Thread starter
- #89
Group N Transmission Mount and Group N Pitch Mount Stop - Purchased {Awaiting Install}
- Thread starter
- #90
The STi has been sitting (driven a few times) over winter. I'm planning on installing the items listed below. Nothing crazy. Updated List of parts awaiting install.
* KillerB Oil Pickup [Awaiting Install}
* GroupN Transmission Mount [Awaiting Install]
* GroupN Pitch Mount Stop [Awaiting Install]
* GroupN Motor Mounts [Awaiting Install]
* TurnInConcepts Transmission Crossmember Bushings (Comfort) [Awaiting Install]
Also added a few things to the list of Future Mods (awaiting purchase).
* Kartboy Rear Subframe Outrigger Bushings - Comfort
* Perrin Rear Diff Subframe Lockdown (PSP-SUS-525)
* Kartboy Rear Subframe Bolts
- Thread starter
- #92
Per the vendor:
It is common for the rear subframe to have excessive movement under lateral loads, and Kartboy helps to relieve this issue with their Rear Subframe Lockdown Bolts. This kit includes a pair of bolts that are installed into sleeves that will keep your subframe locked in place without the risk of affecting your alignment among other things that can happen once our factory subframe bolts come loose.
- Thread starter
- #93
Drove the STi at lunch yesterday since it wasn't too bad out. It's been a few weeks since I drove it due to the cold/shitty weather.
stilletto
Well-Known Member
Instantly thought of you.
Sent from my Pixel 3 XL using Tapatalk
Sent from my Pixel 3 XL using Tapatalk
- Thread starter
- #96
That's funny! Wingless Trunk is getting cleaned/buffed right now 
The forum needs the pics tho!
- Thread starter
- #98
Wingless Trunk will be detailed tomorrow. It has an older STi badge on it and he is going to get a heat gun and debadge it. 
Picture of the side of the car for you @bauer311
Picture of the side of the car for you @bauer311
What car? All i see is a tire...
Nice job on the detailing bootyluvr, that's an excellent finish.
Nice job on the detailing bootyluvr, that's an excellent finish.
- Thread starter
- #100
I can't take credit for the detailing work. I pay people to do it. I don't have the patience or skill or want to detail vehicles. I have the time lol