• A large amount of updates and changes have been implemented. Users who have been using tapaptalk will need to access the site in their phone browser. You should see a big difference between the desktop/tablet/phone styles to make navigation and site options easier to use. If you come across any strange behavior, or errors, please report them in this thread. If you have any issues logging into the site, please delete all 9thcivic cookies and then log into the site. https://9thcivic.com/forum/threads/site-changes.16518/

ADExternal's PMM Civic aka Orianna

ADExternal

Lvl: 99 Modifier
1,917
1,535
Houston, Tx
Vehicle Model
Civic Ex
Body Style
Coupe
Thank you for your kind words djax, it's nice to be recognized how much thought that was put into the overall concept.
 

ADExternal

Lvl: 99 Modifier
1,917
1,535
Houston, Tx
Vehicle Model
Civic Ex
Body Style
Coupe
Yea, an extremely tiny one I believe the bit was 1/32 or 1/16. Then drilled through a plastic hole cover then through the frame with a 5/16. Hot glued everything down sealing the holes from moisture as well.
 

ADExternal

Lvl: 99 Modifier
1,917
1,535
Houston, Tx
Vehicle Model
Civic Ex
Body Style
Coupe
Yessir, the process is pretty simple if you've done wiring. The hard part was doing the installation cleanly with the right LEDs, wire gauge, which line to tap into, and the only hassle is taking off the rear bumper. Doing it slowly and precisely will take about 20mins.

Keep in mind I painted my under rear and did prep work on the LEDs as well to have them perfectly blend and not be bright.
 
Top