ADExternal's PMM Civic aka Orianna

LED Side mirrors tomorrow. Hope everything goes well. Also ordered oem HFP sides will eta Wednesday/Thursday
 
Ill try to do one, I did this with a time limit so I couldnt take a lot of pictures like I usually do. But I'll make one some how.

IMG_1468.JPG
 
For anyone that just want to know what parts I ordered and wants to do it themselves.

8x Secure Screws - $1.05
90109-SAG-H01 SCREW, TAPPING (4X14) (TRUSS)

Right side Turn signal - $44.71
34301-TM0-305 LIGHT UNIT, R. SIDE TURN

Left side Turn signal - $44.71
34351-TM0-305 LIGHT UNIT, L. SIDE TURN

Right side Mirror Housing - $16.14
76205-TR2-A01 HOUSING SET, R.

Left Side Mirror Housing - $16.14
76255-TR2-A01 HOUSING SET, L.

Right side Mirror Cap (Select your color) - $45.40
76201-TR2-A01ZM CAP, R. SKULL *G534M* (GREEN OPAL METALLIC)
76201-TR2-A01ZE CAP, R. SKULL *NH787M* (COOL MIST METALLIC)
76201-TR2-A01ZH CAP, R. SKULL *NH700M* (ALABASTER SILVER METALLIC)
76201-TR2-A01ZD CAP, R. SKULL *NH737M* (POLISHED METAL METALLIC)
76201-TR2-A01ZC CAP, R. SKULL *NH731P* (CRYSTAL BLACK PEARL)
76201-TR2-A01ZB CAP, R. SKULL *NH578* (TAFFETA WHITE)

Left side Mirror Cap (Select your color) - $45.40
76251-TR2-A01ZB CAP, L. SKULL *NH578* (TAFFETA WHITE)
76251-TR2-A01ZC CAP, L. SKULL *NH731P* (CRYSTAL BLACK PEARL)
76251-TR2-A01ZM CAP, L. SKULL *G534M* (GREEN OPAL METALLIC)
76251-TR2-A01ZH CAP, L. SKULL *NH700M* (ALABASTER SILVER METALLIC)
76251-TR2-A01ZE CAP, L. SKULL *NH787M* (COOL MIST METALLIC)
76251-TR2-A01ZD CAP, L. SKULL *NH737M* (POLISHED METAL METALLIC)

http://www.collegehillshondaparts.c...brid-lea-heat/variable/interior-bumper/mirror

Total Cost for me: (8x 1.05) + (2x 44.71) + (2x 16.14) + (2x 45.40) = 220.90 + shipping.
Actual cost of the entire assembly is 408.98 - 220.90 = saved $$188.08

 
Oh you used all Honda parts? Even better! I don't need a DIY lol. I will be doing this very soon :D
 
FB2Chris said:
Oh you used all Honda parts? Even better! I don't need a DIY lol. I will be doing this very soon :D
Click to expand...

Except one thing. If you recall my DIY on my rear camera (link in my sig) I used the connector from the LEDs to connect the turn signals. Aside from that, just swapping the housing and running the wires were the hard part. Truthfully, I thought this was gonna be harder but I soon found out I did more than enough research to make this a easy project.

Edit: I also smoked my turn signals so it would flow with the rest of the car. So when you get it, its suppose to be clear/white. Like below.

zeco-comparo-details---16.jpg
 
@ADExternal out of curiosity when you say you used the same LED connectors as in your reverse camera DIY, did you meet halfway with two plugs (around the footwells perse)?
 
So I finally test the mirror and found out they don't work 100% with the hybrid housing. The passenger seems fine because you sit further away but the driver is facing the car and can't view out any further. The corner of the mirrors and housing are just hitting so it doesn't widen. Gonna mod that a little bit and see if that work.
 
You must log in or register to reply here.
Back
Top