Need Confirmation on 2013 civic Map, Dome, Reverse, Fog, Drl(Highs) Lows bulbs

I was able to fit a really small flat screwdriver in between the plastic and the housing. If I remember right, there are two really small notches that you use. I put a rag around the end of the screwdriver to not gouge the plastic. It is tight.
 
I was able to fit a really small flat screwdriver in between the plastic and the housing. If I remember right, there are two really small notches that you use. I put a rag around the end of the screwdriver to not gouge the plastic. It is tight.
Thank you sir
 
The Best tool to open up the lights without scratching the plastic is a pick. You need a thin pointed head similar to what dentist use. Flat heads will damage the surrounding plastic.

-sorry for the late response, I've been busy with work.
 
Last edited:
These are a life saver for many uses on car work:

51eLK5xjAXL.jpg


The smaller ones have a tip that is quite thin and should work.
 
Last edited:
Back
Top