size of sedan jdm emblems?

If you break the pins on the stock emblems and want to re-apply them you can do that with 3M mounting tape..... they have to be clean and dry, apply the tape, trim with a razor blade and then peel the backing and stick them in place.

Aligning them precisely will take a bit more work without pins, and once the adhesive touches, you won't be able to move them around. Best to place them without peeling the backing, mark the location with masking tape top, bottom and sides, then peel the tape to apply. The back will obviously be more difficult than aligning the front.
 
Michael Hurd said:
If you break the pins on the stock emblems and want to re-apply them you can do that with 3M mounting tape..... they have to be clean and dry, apply the tape, trim with a razor blade and then peel the backing and stick them in place.

Aligning them precisely will take a bit more work without pins, and once the adhesive touches, you won't be able to move them around. Best to place them without peeling the backing, mark the location with masking tape top, bottom and sides, then peel the tape to apply. The back will obviously be more difficult than aligning the front.
Click to expand...
not a bad idead but i think at that point depending on how much new emblems are might be worth it at last i know they will be straight
 
Taking off the front bumper is ridiculously easy for one person to accomplish. To me it's more work applying tape, but if you're looking to save money then it might be the best option for you.
 
jasonandre said:
Taking off the front bumper is ridiculously easy for one person to accomplish. To me it's more work applying tape, but if you're looking to save money then it might be the best option for you.
Click to expand...
I'm not trying to save money I just would like to paint my emblems instead of the jdm. I still have mixed feelings about them
 
Brooksie365 said:
not a bad idead but i think at that point depending on how much new emblems are might be worth it at last i know they will be straight
Click to expand...

New emblems will set you back a bit over $ 30 + shipping for the pair from College Hills Honda. ( With the Forums Reward pricing, search the site here for details on how to sign up )

75700-TR0-000
75701-TR0-003
 
Are Grfxp's emblems the correct size for our cars. I drive a sedan also and want a set but hesitant because I want good fitment.
 
correct. Quite a few users have bought their emblems from them.
 
I have a 12 si coupe , and i am looking for a set of the jdm red badges .will the sedan badges be the same size?
 
Last edited:
No need to remove the entire bumber if your gonna break the tabs anyway all you need is a long flathead and a hammer and shove the flat head in front of the hood latch and you can rest the tip on each tab and just give a nice tap with the hammer and done deal :thumbsup:
 
3 vendors here sell them. Grafixpressions, corsport, and procivic.
 
I just installed my jdm emblems today :) fitment was actually perfect! O.O
 
You must log in or register to reply here.
Back
Top