immajackuup
Well-Known Member
is that with secondary muffler?? if so that kinda loud.
ultimate racing downpipe
- Thread starter thevietkid33
- Start date
- Staff
- #262
- 52,105
- 22,314
with the secondary muffler
Michael Kelley
Well-Known Member
Yerp, but it's only "loud" if I drive it a certain way....if I drive easy, you can barely hear it and its almost non-existant if im in 6th cruising. It's perfect IMO
Michael Kelley
Well-Known Member
Maybe I should do a crusing vid so people can hear the quiet side of it lol
immajackuup
Well-Known Member
is the secondary muffler a straight through design??
Yes the 2nd muffler is a straight through design.
Murcethecurse
Well-Known Member
- 67
- 18
what is the gain on this ultimate racing downpipe header? can i run that and also run full race exhaust at the same time?
Sleepingpanda
Kung-Fu Panda
http://bit.ly/TpBaH2
http://bit.ly/Vy5Jbe
ANNNNNDDDDD considering the ultimate racing down pipe bolts up to the STOCK EXHAUST just fine. ANDDDDDD the Full race exhaust bolts to the stock down pipe just fine....................................
http://bit.ly/Vy5Jbe
ANNNNNDDDDD considering the ultimate racing down pipe bolts up to the STOCK EXHAUST just fine. ANDDDDDD the Full race exhaust bolts to the stock down pipe just fine....................................
- Staff
- #269
- 52,105
- 22,314
ultimate racing downpipe with ultimate racing catback exhaust dyno
==
===
====
====
fullrace is 3" catback... as well as the ultimate racing catback for the 2012. So, in theory... it should be very close to the numbers above
==
===
====
====
fullrace is 3" catback... as well as the ultimate racing catback for the 2012. So, in theory... it should be very close to the numbers above
immajackuup
Well-Known Member
watch my rv6/UR cat produce more power then bother of them.
- Staff
- #271
- 52,105
- 22,314
when's the dyno happening?
immajackuup
Well-Known Member
2 weeks after i get my UR cat-back this week.
TJ___90
Well-Known Member
So guys what do you all think going UR downpipe 3" with the stock exhaust 2.25 I think? will it work just fine? or better not
Michael Hogains
Well-Known Member
I did a drive by with my newly installed ur downpipe. Remember I also have installed invidias mach1 exhaust and ingen intake. The dp has no cats. sorry for the video/sound quality but this is what i have at the moment. The exhaust ppe is 2 & 3/4
Michael Hogains
Well-Known Member
<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid207.photobucket.com%2Falbums%2Fbb300%2Fmikehogains%2Furdpdriveby.mp4">
hotdogjohnny
Well-Known Member
Not to take the thread of-topic, but it looks from the reflection in the video that the go pro was atttached using the sauction cup accessory. Is that right, and if so, did you do anything special to adhere it to the car, or add a redundancy in case it fell off at speed. I ask beecause I made a magnetic mount, but don't fully trust it. I bought the suction cup mount, but planned to use it only inside the car. Thanks.
- Staff
- #277
- 52,105
- 22,314
The gopro suction cup mount is very very strong. The instructions even note that it can withstand 100+ mph wind resistance. Latch it on your windshield and try to remove it without releasing the latch.
- Staff
- #278
- 52,105
- 22,314
View: http://www.youtube.com/watch?v=3sPW1ylM-SU
jump to 45+ seconds in...
150+mph gopro on a plane with gopro suction cup mount. Bunch of similar vids where people have put one on their planes and it worked. Big thing would just be to make sure the surface is clean you're mounting the cup to, and making sure all of the screws are tight.
I know there are vids of cars making 8 second passes in the quarter mile with them attached on yt.
jump to 45+ seconds in...
150+mph gopro on a plane with gopro suction cup mount. Bunch of similar vids where people have put one on their planes and it worked. Big thing would just be to make sure the surface is clean you're mounting the cup to, and making sure all of the screws are tight.
I know there are vids of cars making 8 second passes in the quarter mile with them attached on yt.
hotdogjohnny
Well-Known Member
cool. thx webby.
how do you like the mach 1 exhaust? i saw a vid on youtube (idk if that was you or not) and it sounds really nice and loud, thanks!