Brooksie365
Well-Known Member
Maybe to you but definitely not me haha
Full Race 9th Gen 3" Exhaust now ready!!
- Thread starter Full-Race
- Start date
austin1636
Well-Known Member
Is it possible to get a DP with no cat/ resonator? I want it straight through and loud, no cat/ resonator.
(The resonator on the actual exhaust is fine)
- Staff
- #164
Absolutely!
Here is a guide to DPs:
http://9thcivic.com/forum/threads/2012-civic-downpipe-list-with-product-info-links.6853/
austin1636
Well-Known Member
I meant full race specific, I've seen the thread lol thanks for the help though :highfive:
austin1636
Well-Known Member
Ahh, I didn't look at the ordering page, I only saw it with a cat.
Vit and I will be tuning my 2013 as soon as Dave gets a flashpro update
just want some go fast parts lol I'm assuming most* 12 parts will fit the 13 sedanI know this question has prolly been answered but just want to be 100% before I order FR exhaust. The 2012+ sedan exhaust will fit the 2013 sedan correct ? Full-Race Full-Race Geoff
riskyciv13
Member
I just saw noticed this thread, LOL!
FULL-RACE, will your full exhaust, catless + the downpipe throw any CELs? I'm planning of buying it. Also, are there headers available for the '13 Si sedan? Thanks!
FULL-RACE, will your full exhaust, catless + the downpipe throw any CELs? I'm planning of buying it. Also, are there headers available for the '13 Si sedan? Thanks!
Brooksie365
Well-Known Member
im almost positive that the 12 and the 13 are the same cars pretty much
- Staff
- #171
riskyciv13
Member
I believe FULL RACE gives you the O2 spacer (fouler) for the catless. I'll let you guys know when I get it, if not sooner or later if someone beats me to it. Either way, that's what getting. Shouldn't throw any CELs IF that fouler is on.
fritz
Well-Known Member
I just ordered my full race down pipe with high flow cat and exhaust yesterday! Thanks so much jon guerra from Full Race for helping me! I can't wait to recive it! next is an intake manifold and tune from vitviper! So excited!
Is there an intake mani made for 9thgens yet? I've seen people custom rig an 8thgen RBC, but I'm unaware of any other options.
GSquared
Well-Known Member
Would a catless DP bring more gains than the catted one? I've never fully grasped this and as Florida has no special emissions laws I know a lot of people here usually go catless when the option is given, is that due to more gains or is it just a louder sound that people are going for? I was thinking about grabbing this FR DP & an exhaust from somewhere (maybe FR as well) but I don't want it to be heard all around my neighborhood when I pull in to the entrance like some of the cars here.
I believe catless makes more gains, but I can say that with the downpipe and a 3" exhaust (I'd recommend full race ;] ) would probably be heard by your neighbors. Upon cold start up its loud enough to set off car alarms. Just regular idle though it purrs like a kitten. (More of a mountain lion kind of kitten). But if you break over 2k in the hood, the neighbors will hear you.
fritz
Well-Known Member
Rbc actually makes a kit to make there 8th gen manifold a bolt on project no Machining needed.
http://prlmotorsports.com/store/2012-civic-si-rbc-intake-manifold-adapter-kit/
There is also someone offering a stock manifold, or at least the non plastic part of the k-24 polished. I don't know of any k-24 specific yet.
GSquared
Well-Known Member
Being heard by some neighbors is perfectly fine, but there's some cars that when they enter the place you can hear them load and clear (this is from my house pretty far from the entrance). I guess I'll hold off for now. Maybe I can find someone in South Florida that has one that I can listen to :P
Thanks for the info!
