Betty White tying da twisties like skrewlaces Wit dat possible *Whine* on teh Side... bout dat lyfe.

[Eddie Blanco]

Anyone want to trade colors lol

Sell it, use the money down on a 13!

 

[323]

Anyone want to trade colors lol

I do!

 

[Six_speed_demon]

Sell it, use the money down on a 13!

U know I like the way you think!

 

[Six_speed_demon]

I don't want to get called out on Facebook like Sleepingpanda, so I'll just say I literally got the first one sold. I tried to install it. Why would I recycle pieces that work? I've put three of these on 12's. @Arm0gedd0ns included. I "heard" they're doing another redesign ANd just looking at the pictures....they look like difFerent bends and the welds are on the other side of the sensor. A little different? To each his own. webby Arm0ged0n bozo88 chadoku

Well long as they have a 2012+ cai out now I good. Did you have to remove the resonator behind the bumper?

 

[chadoku]

Well long as they have a 2012+ cai out now I good. Did you have to remove the resonator behind the bumper?

they say it would help get more cool air into the bay... with the injen cai right now with my long commutes, i notice it does heat up quite a bit. specially we been getting pretty good weather here in the dmv lately.

 

[Six_speed_demon]

they say it would help get more cool air into the bay... with the injen cai right now with my long commutes, i notice it does heat up quite a bit. specially we been getting pretty good weather here in the dmv lately.

So do we know when the 2013 injen cai will be released? I would rather wait for that ifs supposed to be better

 

[323]

So do we know when the 2013 injen cai will be released? I would rather wait for that ifs supposed to be better

I would call Injen

 

[Six_speed_demon]

I would call Injen

Yea that sounds like a good idea will do later in the day will update with the info I got

 

[chadoku]

Yea that sounds like a good idea will do later in the day will update with the info I got

to be honest i dont know if it would make any difference, design wise. 2012-2013 are pretty much exactly the same engine bay setup.. as far as where the filter is gona be located and all.
they may change the welds or the bends, but i think its still going to be located behind or close to the radiator under the battery. But if your gona call em let us know if theyre any breakthrough lol.

 

[Six_speed_demon]

to be honest i dont know if it would make any difference, design wise. 2012-2013 are pretty much exactly the same base.. as far as where the filter is gona be located and all.
they may change the welds or the bends, but i think its still going to be located behind or close to the radiator under the battery. But if your gona call em let us know if theyre any breakthrough lol.

Ok cool well if its the same as the 12 ill just get that. I thought it was going be a big difference but I will still call then and see what they say!

 

[chadoku]

Ok cool well if its the same as the 12 ill just get that. I thought it was going be a big difference but I will still call then and see what they say!

im happy with it, imo i just think it needs a tune otherwise the only noticeable difference is the sound. also i dont know if its in my head but i feel a lag at partial throttle - could be heatsoak from behind the radiator. Would you be able to ask injen about this too bro? thanks!

 

[Six_speed_demon]

im happy with it, imo i just think it needs a tune otherwise the only noticeable difference is the sound. also i dont know if its in my head but i feel a lag at partial throttle - could be heatsoak from behind the radiator. Would you be able to ask injen about this too bro? thanks!

Yea for sure i ask that for you man!

 

[323]

im happy with it, imo i just think it needs a tune otherwise the only noticeable difference is the sound. also i dont know if its in my head but i feel a lag at partial throttle - could be heatsoak from behind the radiator. Would you be able to ask injen about this too bro? thanks!

did you have your VSC off? i felt the same lag at first, especially before a tune. you could try turning VSC off, i found that even if i didnt put the throttle all the way down, the tires would still want to spin and the VSC was causing a lag.

 

[Six_speed_demon]

did you have your VSC off? i felt the same lag at first, especially before a tune. you could try turning VSC off, i found that even if i didnt put the throttle all the way down, the tires would still want to spin and the VSC was causing a lag.

thats a good thought there my friend. i still havent seen the vsc kick in at all yet

 

[323]

thats a good thought there my friend. i still havent seen the vsc kick in at all yet

you dont necessarily have to see the light come on, the engine will cut power for what feels like half a second if the tires start to spin just a little bit, that might be the lag he's feeling

 

[Six_speed_demon]

you dont necessarily have to see the light come on, the engine will cut power for what feels like half a second if the tires start to spin just a little bit, that might be the lag he's feeling

Oh ok I didn't know that. Well that's good to know

 

[Six_speed_demon]

Better shot if the rear emblem but will get better ones once the weather gets much better wont be driving it for a while

 

[Six_speed_demon]

4th mod completed!

Skunk2 Black series oil cap
Skunk2 Black series radiator cap
SickSpeed brake container sock
SickSpeed clutch container sock

 

[323]

I think a red overlay on the civic emblem will complete the back

 

[Six_speed_demon]

I think a red overlay on the civic emblem will complete the back

you know that is a good idea...but i think i am going to remove the the civic emblems all together tho.