Betty White tying da twisties like skrewlaces Wit dat possible *Whine* on teh Side... bout dat lyfe.

323

323

Modifier
5,252
3,682
Chicago
Vehicle Model
Civic Si
Body Style
Sedan
Six_speed_demon said:
you know that is a good idea...but i think i am going to remove the the civic emblems all together tho.
Click to expand...

that would look nice and clean too, i did that on mine
 
Six_speed_demon

Six_speed_demon

Well-Known Member
1,855
1,295
MID-ATL CREW (fort washington md)
Vehicle Model
Civic Si
Body Style
sedan
Sleepingpanda said:
Yea be careful. Don't trash talk injen. Lol. They'll just trash talk you on Facebook and try to make everything you say look invalid. That's how good of a company they are.
Click to expand...

why has that happened to you? i didnt think they were like that.

323 said:
its very easy with some floss and then i just used water to get the rest of the glue off the trunk
Click to expand...

yea thats what everyone said to use. mine should pop off pretty easy seeing that its still new and unde 1k still. my emblems came off so easy lol
 
chadoku

chadoku

Well-Known Member
133
56
Norther VA
Vehicle Model
Civic Si
Body Style
Sedan
323 said:
did you have your VSC off? i felt the same lag at first, especially before a tune. you could try turning VSC off, i found that even if i didnt put the throttle all the way down, the tires would still want to spin and the VSC was causing a lag.
Click to expand...


yea i always turn it off lol
 
Arm0ged0n

Arm0ged0n

Well-Known Member
1,574
1,484
Corona, CA
Vehicle Model
Honda Civic SI
Body Style
Sedan
Eddie Blanco said:
I don't want to get called out on Facebook like Sleepingpanda, so I'll just say I literally got the first one sold. I tried to install it. Why would I recycle pieces that work? I've put three of these on 12's. @Arm0gedd0ns included. I "heard" they're doing another redesign ANd just looking at the pictures....they look like difFerent bends and the welds are on the other side of the sensor. A little different? To each his own. webby Arm0ged0n bozo88 chadoku :eek:
Click to expand...
Eddie Blanco sup brosky, like I had mentioned to you on my text last night, Injen was working with a new design; however it's not going to happen anytime soon. That's all I know
 
Eddie Blanco

Eddie Blanco

Well-Known Member
976
654
Arm0ged0n said:
Eddie Blanco sup brosky, like I had mentioned to you on my text last night, Injen was working with a new design; however it's not going to happen anytime soon. That's all I know
Click to expand...

I don't know anything about their current situation, AND I want to reiterate I'm not bashing them. I think It brought gains to my 12. But you can testify if it's too close to the tranny, the car won't go into fifth. Remember after you installed the throttle body spacer? That's all I'm sayin. I wasted my time installing it and not being able to get enough clearance for fifth. The tangs on the side that mount it were cut at an angle and it wouldn't work.
 
Six_speed_demon

Six_speed_demon

Well-Known Member
1,855
1,295
MID-ATL CREW (fort washington md)
Vehicle Model
Civic Si
Body Style
sedan
Eddie Blanco said:
I don't know anything about their current situation, AND I want to reiterate I'm not bashing them. I think It brought gains to my 12. But you can testify if it's too close to the tranny, the car won't go into fifth. Remember after you installed the throttle body spacer? That's all I'm sayin. I wasted my time installing it and not being able to get enough clearance for fifth. The tangs on the side that mount it were cut at an angle and it wouldn't work.
Click to expand...

oh ok so i have to wait for the new revised intake to be released man i guess i will be waitin for the new intake
 
You must log in or register to reply here.
Top