Who is #1 on 9thcivic?

[Rob Maust]

Post your dyno sheets and the list of mechanical modifications ladies and gents lets see who has the best number for the following
1. N/A
2. Superchargers
3. Turbochargers
Photos, videos (dyno only), crew number, location, and anything else you would like

 

[hotdogjohnny]

You start!

 

[webby]

a start
http://9thcivic.com/forum/threads/200-whp-club.6650/

 

[Rob Maust]

You start!

I dont have my dyno graphs so I cant start.

 

[hotdogjohnny]

 

[KennyGS]

 

[hotdogjohnny]

 

[webby]

@Sleepingpanda @GSquared ... ummm

 

[Sleepingpanda]

292hp 254tq.

Ct supercharged
3.15 pulley
750cc DW injectors
PRL 3.5" cai
ZDX tb with prl adapter
Skunk2 3" alpha header
Full Race 3" exhaust

I think thats about it engine wise.

 

[Rob Maust]

here it goes all... well the base tune from prl graph.. current to come in oct.
PRL Motorsports Stage 2 turbo system 2012 Civic SI
5862 .82a/r ball bearing option
Part Powder coat red option
ID 1000 injectors, 06-11 civic SI/Kseries, no adapters, pigtails
HONDATA Flash Pro
HONDATA-4BAR-K Hondata 4bar MAP K-series
DW65C 265lph in-tank fuel pump
AEM Tru-Boost Controller/Gauge
Competition Clutch clutch kit; 06-11 Civic SI 6 puck sprung
Competition Clutch street lite flywheel
Honda RBC Intake Manifold
RBC Intake Manifold Adapter Kit

 

[FB2Chris]

 

[Rob Maust]

@FB2Chris hahahahahahahah made my day

 

[GSquared]

I mean I don't have a roller dyno of the current setup but here is the eDyno:

PRL Turbo Kit with GTX3071R
ID 1000CC Injectors
CM FX350 Clutch (It is amazing by the way)
RBC w/ Stock TB
Full-Race 3" Exhaust

Got Redshift Coilovers on order (not that they will increase this dyno at all) and ordering new tires for my new wheels soon too (wheel spin is crazy on these).

 

[Rob Maust]

I mean I don't have a roller dyno of the current setup but here is the eDyno:

PRL Turbo Kit with GTX3071R
ID 1000CC Injectors
CM FX350 Clutch (It is amazing by the way)
RBC w/ Stock TB
Full-Race 3" Exhaust

Got Redshift Coilovers on order (not that they will increase this dyno at all) and ordering new tires for my new wheels soon too (wheel spin is crazy on these).

Nice stuff man! Don't worry, my edyno was like 415ish after I retuned with Vit. even though we are running more boost. Im sure you are in the range I am in. Honestly im not sure what I am at, but before the vit tune those were my numbers at 11psi im running 12 now and its a hell of a difference. I honestly think now that the ball bearing turbo is broken in and the new tune and more boost I am around the 450-480 range but I could be wrong. Im anxious to see what it puts down when I go back to PRL in oct. should have some nice numbers...

Your set up is sick. Well done!

 

[Rob Maust]

View attachment 27090 292hp 254tq.

Ct supercharged
3.15 pulley
750cc DW injectors
PRL 3.5" cai
ZDX tb with prl adapter
Skunk2 3" alpha header
Full Race 3" exhaust

I think thats about it engine wise.

I cant lie, I really love the pulleywine on the si's. Nice set up!

 

[Mikeorock]

Prl trurbo kit stage 2
5862 ball bearing
Invidia q300 exhaust
Stage 4 competition clutch
1000 cc id injectors
Rbc intake manifold

 

[GSquared]

I think PRL has the top after this:

I can't even imagine that to be honest (when there is traction!)

Details from them:
2012 Civic si
PRL Stage 2 Turbo kit with 5858 jb turbo
PRL RBC swap
PRL 3in Exhaust
PRL Fuel Return System (single pump version dw65c will be available with a inline 044 pump as an option)

18.5psi 509whp 400trq

 

[Mikeorock]

I think PRL has the top after this:

I can't even imagine that to be honest (when there is traction!)

Details from them:
2012 Civic si
PRL Stage 2 Turbo kit with 5858 jb turbo
PRL RBC swap
PRL 3in Exhaust
PRL Fuel Return System (single pump version dw65c will be available with a inline 044 pump as an option)

18.5psi 509whp 400trq

Hahaha.. Sickkk... I just got mine tuned.. I still have the stock map sensor.. I can get mine up what you have if i get it. But im just gonna play it safe.. Arent you worries about blowing it up???

 

[Mikeorock]

Stock map only allows 10 psi

 

[cetromero]

I think PRL has the top after this:

I can't even imagine that to be honest (when there is traction!)

Details from them:
2012 Civic si
PRL Stage 2 Turbo kit with 5858 jb turbo
PRL RBC swap
PRL 3in Exhaust
PRL Fuel Return System (single pump version dw65c will be available with a inline 044 pump as an option)

18.5psi 509whp 400trq

Are you using stock internals?