Squiggy's 2012 DBP II Si Coupe

[axion_industries]

Great product..

 

[squiggy]

Picked up some angled Zerk fittings so I can finally install the Energy Suspension bushings.

 

[squiggy]

Ordered some speed bleeders for the clutch and brake lines. Prepping for CDV delete and DOT 4 swap all around.

 

[Dar-Dar]

DOT4 is the best!

 

[Six_speed_demon]

My Hasport mount from @axion_industries is going in tomorrow or Sunday!

View attachment 28241

This is weird? What is that bracket for?


@Killin this is what the rear mount looks like on the 9thgen

 

[squiggy]

This is weird? What is that bracket for?

It replaces #2 and #6. The bracket goes on the engine if I recall correctly...haven't looked yet. Didn't have time to get to it this weekend.

 

[Six_speed_demon]

It replaces #2 and #6. The bracket goes on the engine if I recall correctly...haven't looked yet. Didn't have time to get to it this weekend.

Oh wow!!! That's different! But doesn't seem any harder for the install! Well I need to order this thing.

 

[axion_industries]

Easy install

 

[Six_speed_demon]

Easy install

Is this one like the 8thgen? Have to remove the top dog bone and front mount to install?

 

[axion_industries]

Just remove rear mount and install the Hasport, nothing else

 

[Six_speed_demon]

Just remove rear mount and install the Hasport, nothing else

Oh that is great!!!

 

[squiggy]

CDV delete, stainless steel clutch line, and DOT 4 swap in progress.

 

[squiggy]

CDV delete, stainless steel clutch line, and DOT 4 swap in progress.

Done. About to go for a drive. Then come back and do the engine mount and rear sway bar bushings.

 

[323]

Don't forget the DIY for the mount

 

[squiggy]

Don't forget the DIY for the mount

Glad I checked! I would have forgotten as I am plowing right through things. Just crawled out form under the car looking at it. Seems simple. It is just five bolts. I just cut a small piece of 2x4 to support the engine. Getting ready to run to the store to grab something for dinner first. Gotta get grease for my grease gun so I can grease the new rear bushings. Old ones were already drying up!

 

[squiggy]

Engine mount is on, fog light bulbs replaced, and rear sway bar bushings have been replaced as well as greased.

Quite the productive day.

 

[Six_speed_demon]

Engine mount is on, fog light bulbs replaced, and rear sway bar bushings have been replaced as well as greased.

Quite the productive day.

Pics??? How do you like it?

 

[squiggy]

Pics??? How do you like it?

DIY coming tomorrow maybe. I got the street bushing and it vibrates a bit more than I expected, but I imagine it will not be so bad in a few weeks when it wears in a bit.

 

[Six_speed_demon]

DIY coming tomorrow maybe. I got the street bushing and it vibrates a bit more than I expected, but I imagine it will not be so bad in a few weeks when it wears in a bit.

Yea it takes about 500-1k miles to fully break in.

 

[axion_industries]

DIY coming tomorrow maybe. I got the street bushing and it vibrates a bit more than I expected, but I imagine it will not be so bad in a few weeks when it wears in a bit.

Have you noticed the better shifting and no wheel hop?