323's Build

stilletto

Well-Known Member
1,709
1,422
Chicago, IL
Vehicle Model
Volkswagen Golf GTI
Haha. E85 isn't always E85. I think gas stations aim for anywhere between 80-90%, but it varies when the seasons change. They sell testers for fairly cheap, $5 or so, where you fill up X amount water and Y amount fuel. The mixture separates and there are lines printed on the test tube to show the percentage of that batch of gas.
 

323

Modifier
5,252
3,682
Chicago
Vehicle Model
Civic Si
Body Style
Sedan
Interesting... Well I have a bit of time to learn, but it's going to happen. That'll be the last performance mods I do. Anything else will take way too much modification.
 

xXCiviXx

Well-Known Member
890
657
Calgary, AB, Canada
Vehicle Model
Si
Body Style
Coupe
Thought I would update you on the wire tapping for led bar signaling. Red signal to white LED bar and brown signal to black LED bar on passenger side. Would be corresponding wires on drivers side. Hope this helps if you still plan on connecting them to your signal lights
 

323

Modifier
5,252
3,682
Chicago
Vehicle Model
Civic Si
Body Style
Sedan
Thought I would update you on the wire tapping for led bar signaling. Red signal to white LED bar and brown signal to black LED bar on passenger side. Would be corresponding wires on drivers side. Hope this helps if you still plan on connecting them to your signal lights
Already did, the problem wasn't the wiring but the type of bulb.
Thanks for updating though
 

323

Modifier
5,252
3,682
Chicago
Vehicle Model
Civic Si
Body Style
Sedan
For anyone that has knowledge on the topic, I'm going to change my suspension and I'm looking to see which will let me sit a little higher than I am now.
The Megan's are great, but the highest they go is still about 2.5" lower than stock and that's just a little too low for me and the city
 

323

Modifier
5,252
3,682
Chicago
Vehicle Model
Civic Si
Body Style
Sedan
Lots of work done today, nothing exciting though.
Greased my camber arms, tried to raise the back a little, put spring silencers on the back springs to stop them from rubbing when going over bumps or when I got people in the back.
I found out where the creaking in the back was coming from, it was the sway bar bushings. I'm going to grease them again and hopefully that'll do the trick.
 

silver04v

Well-Known Member
390
233
I'm thinking buddy club coils would be what you want. I have them and when I had them set up first, my car was no lower than with sportlone springs. And there was a bunch of height I could have added. I think you could get a 1.5 drop with them.
 
Top